The VR5 engines are a family of petroleum fuelled Internal combustion engines developed by the Volkswagen Group and produced from 1997 to 2006[citation needed]. They are derived from the VR6 engine family,[1] also developed by Volkswagen, but with one fewer cylinders. The VR5 is highly compact, thanks to the narrower angle of 15° and a displacement of 2,324 cc (2.3 L; 141.8 cu in). The VR5 was the first production block to use five cylinders in a VR design with a 15-degree angle.

VR5
Overview
ManufacturerVolkswagen
Also calledstaggered five
Production1997 (1997) to 2006 (2007)
Layout
ConfigurationVR5
Displacement2,324 cc
Cylinder bore81.0mm
Piston stroke90.2mm
Cylinder block materialGrey cast iron
Cylinder head materialCast aluminium alloy
Valvetrain10 valve (AGZ) or 20 valve with variable valve timing (AQN/AZX), one direct acting cam per cylinder bank
Compression ratio10:1 (AGZ) or 10.8:1 (AQN/AZX)
RPM range
Max. engine speed6500 RPM
Combustion
Fuel systemCommon rail multi-point electronic sequential indirect fuel injection with five intake manifold-sited fuel injectors
ManagementBosch Motronic M3.8.3 (AGZ), Bosch Motronic ME7.1 (AQN/AZX)
Fuel typePetrol
Oil systemWet sump
Output
Power output150 PS (AGZ) to 170 PS (AQN/AZX)
Torque output209 N⋅m (AGZ) to 220 N⋅m (AQN/AZX)
Emissions
Emissions control systemsThree-way catalytic converter with lambda control and exhaust secondary air injection
Chronology
PredecessorNone
SuccessorNone

Technical Information

edit

A VR5 engine block houses two staggered rows of cylinders within a single, short and wide bank – one row of two cylinders and the other having three. This narrow-angle, single bank block makes the five cylinder engine as short as an inline three cylinder, while also having single inlet and exhaust manifolds. In a transverse layout the three-cylinder row is located towards the front, and in a longitudinal layout towards the right. Due to the narrow bank-angle of the two cylinder rows, the arrangement works as a zig-zag staggered, W-patterned inline five-cylinder. The engines have a firing order of 1-2-4-5-3.

The VR5 was initially made with 2 valves per cylinder as the AGZ engine from 1997 until 2000, resulting in a 10 valve engine producing 150 PS (110 kW; 148 hp) at 6000 RPM and 209 N⋅m (154 lb⋅ft) of torque at 3200 RPM. The engine was updated in 2000 as the AQN/AZX engine adding an additional 2 valves per cylinder and variable valve timing, resulting in an 20 valve engine now with 4 valves per cylinder, producing 170 PS (125 kW; 168 hp) at 6200 RPM and 220 N⋅m (162 lb⋅ft) at 3300 RPM. Both versions of the engine had cast aluminium alloy cylinder heads and cast iron cylinder blocks.[1]

Valvetrain and cylinder head

edit

The AGZ had 10 valves in total with 2 unequal sized valves per cylinder and chain driven camshafts. When this was updated the AQN/AZX engine had 20 valves in total, with 4 unequal sized valves per cylinder.

Due to the use of a single cylinder head, a key design principle of the VR engines, exhaust and intake ports were of unequal length between the two cylinder banks. To mitigate this, Volkswagen used unequally sized valves to ensure even flow and power output from the cylinders.[citation needed]

Engine block and pistons

edit

The AGZ engine used a cast iron cylinder block with five staggered cylinders. Each cylinder was 81.0 mm × 90.2 mm (3.19 in × 3.55 in) bore x stroke, resulting in 464.8 cc (28.4 cu in) per cylinder with a 0.90:1 stroke ratio creating an undersquare/long stroke engine. The top of each piston was angled to accommodate for the use of the 15° narrow V angle.

Aspiration, fuel system, and engine management

edit

The AGZ engine was managed by a Bosch Motronic M3.8.3 engine management system and the AQN/AZX engine by a Bosch Motronic ME7.1 engine management system. The engine used multi-point common rail sequential fuel injection, with fuel injected indirectly into the lower inlet manifold section just before the cylinder head intake ports. Fuel and air delivery was controlled by a cable operated throttle body, with a potentiometer monitoring throttle position and allowing the Motronic ECU to deliver the correct amount of fuel. The engine also had a vacuum actuated variable intake manifold, controlled by the ECU via a valve part of the engines vacuum system. The valve is opened and closed depending on engine load, engine speed and throttle position. This allows the engine to take advantage of pressure waves created by the intake valves opening and closing.

VR5 Engine Versions
Engine Code Production Displacement Power(PS) Torque Compression ratio
AGZ 1997–2000 2324 cc 150 @ 6000 RPM 209 N⋅m (154 lb⋅ft) @ 3200 RPM 10:1
AQN/AZX 2000–2006 2324 cc 170 @ 6200 RPM 220 N⋅m (162 lb⋅ft) @ 3300 RPM 10.8:1

The VR5 was used in the Volkswagen Golf, Bora, New Beetle and Passat. The engine was also included in the Toledo, a saloon car made by Volkswagen Group's subsidiary SEAT.

References

edit
  1. ^ a b "Self-Study Programme 195 The 2.3 ltr V5 Engine – Volkspage" (PDF). Volkspage. 1 May 2019. Archived from the original (PDF) on 8 May 2018.