Jump to content

Dynamic modulus

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 129.7.247.207 (talk) at 16:06, 3 November 2010 (→‎Storage and loss modulus). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Dynamic modulus is the ratio of stress to strain under vibratory conditions (calculated from data obtained from either free or forced vibration tests, in shear, compression, or elongation). It is a property of viscoelastic materials.

Viscoelastic stress-strain phase-lag

Viscoelasticity is studied using dynamic mechanical analysis where an oscillatory force (stress) is applied to a material and the resulting displacement (strain) is measured. [1]

  • In purely elastic materials the stress and strain occur in phase, so that the response of one occurs simultaneously with the other.
  • In purely viscous materials, there is a phase difference between stress and strain, where strain lags stress by a 90 degree ( radian) phase lag.
  • Viscoelastic materials exhibit behavior somewhere in between that of purely viscous and purely elastic materials, exhibiting some phase lag in strain[1].

Stress and strain in a viscoelastic material can be represented using the following expressions:

  • Strain:
  • Stress: [1]

where

is frequency of strain oscillation,
is time,
is phase lag between stress and strain.

Storage and loss modulus

The storage and loss modulus in viscoelastic solids measure the stored energy, representing the elastic portion, and the energy dissipated as heat, representing the viscous portion [1]. The tensile storage and loss moduli are defined as follows:

  • Storage:
  • Loss: [1]

Similarly we also define shear storage and loss moduli, and .

Complex variables can be used to express the moduli and as follows:

[1]

where is the imaginary unit. test

See also

References

  1. ^ a b c d e Meyers and Chawla (1999): "Mechanical Behavior of Materials," 98-103.