Jump to content

Comparison of single-board microcontrollers

From Wikipedia, the free encyclopedia


Comparison of Single-board microcontrollers excluding Single-board computers

Name Maker opensource? Processor Format Host interface I/O Release date Notes
Processor Frequency Dimensions Voltage Flash (kB) EEPROM (kB) SRAM (kB) Digital I/O (pins) Digital I/O with PWM (pins) Analog input (pins) Analog output pins
Arduino / Genuino MKR1000 Arduino Yes ATSAMW25 (made of SAMD21 Cortex-M0+ 32 bit ARM MCU,

WINC1500 2.4 GHz 802.11 b/g/n Wi-Fi, and ECC508 crypto device )

48 MHz minimal 61.5 mm x 25 mm USB 3.3 V 256 No 32 8 12 7 1 Announced: April 2, 2016
Arduino 101[1]

Genuino 101

Arduino Yes Intel Curie module[2] two tiny cores, an x86 (Quark SE) and an ARC 32 MHz Arduino / Genuino 68.6 mm × 53.4 mm [ 2.7 in × 2.1 in ] USB 3.3 V 196 24 14 4 6 October 16, 2015 Contains six-axis accelerometer, gyroscope and bluetooth
Arduino Zero[3] Arduino Yes ATSAMD21G18A[4] 48 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB Native & EDBG Debug 3.3 V 256 0 to 16 Kb emulation 32 14 12 6 Released June 15, 2015[5]

Announced May 15, 2014[6] Listed on some vendors list Mar 2015

Beta testing since Aug 1, 2014[7]
Arduino Due[8][9] Arduino Yes ATSAM3X8E[10] (Cortex-M3) 84 MHz Mega 4 in × 2.1 in [ 101.6 mm × 53.3 mm ] USB 16U2[11] + native host[12] 3.3 V 512 0[13] 96 54 12 12 2 October 22, 2012[14] The first Arduino board based on an ARM Processor. Features 2 channel 12-bit DAC, 84 MHz clock frequency, 32-bit architecture, 512 KB Flash and 96 KB SRAM. Unlike most Arduino boards, it operates on 3.3 V and is not 5 V tolerant.
Arduino Yún[15] Arduino Yes ATmega32U4,[16]

Atheros AR9331

16 MHz,

400 MHz

Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB 5 V 32 kB,

16 MB

1 kB,

0 KB

2.5 kB,

64 MB

14 6 12 September 10, 2013[17] Arduino Yún is the combination of a classic Arduino Leonardo (based on the ATmega32U4 processor) with a Wifi system on a chip (SoC) running Linino, a MIPS Linux based on OpenWrt.
Arduino Leonardo[18] Arduino Yes ATmega32U4[16] 16 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB 32U4[16] 5 V 32 1 2.5 20 7 12 July 23, 2012[19]
Arduino Leonardo

The Leonardo uses the ATmega32U4 processor, which has a USB controller built-in, eliminating one chip as compared to previous Arduinos.

Arduino Uno[20] Arduino Yes ATmega328P[21] 16 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB 8U2[22] (Rev1&2)/

16U2[11] (Rev3)

5 V 32 1 2 14 6 6 September 24, 2010[23]
Arduino Uno

This uses the same ATmega328 as late-model Duemilanove, but whereas the Duemilanove used an FTDI chip for USB, the Uno uses an ATmega16U2 (ATmega8U2 before rev3) programmed as a serial converter.

Arduino Mega2560[24] Arduino Yes ATmega2560[25] 16 MHz Mega 4 in × 2.1 in [ 101.6 mm × 53.3 mm ] USB 8U2[22] (Rev1&2)/

16U2[11] (Rev3)

5 V 256 4 8 54 15 16 September 24, 2010[23]
Arduino Mega2560

Total memory of 256 KB. Uses the ATmega16U2 (ATmega8U2 before Rev3) USB chip. Most shields that were designed for the Duemilanove, Diecimila, or Uno will fit, but a few shields will not fit because of interference with the extra pins.

Arduino Ethernet[26] Arduino Yes ATmega328[27] 16 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] Ethernet Serial interface Wiznet Ethernet 5 V 32 1 2 14 4 6 July 13, 2011[28]
Arduino Ethernet

Based on the same WIZnet W5100 chip as the Arduino Ethernet Shield.[29] A serial interface is provided for programming, but no USB interface. Late versions of this board support Power over Ethernet (PoE).

Arduino Fio[30] Arduino Yes ATmega328P[21] 8 MHz minimal 2.6 in × 1.1 in [ 66.0 mm × 27.9 mm ] XBee Serial 3.3 V 32 1 2 14 6 8 March 18, 2010[31]
Arduino Fio

Includes XBee socket on bottom of board.[30]

Arduino Nano[32] Arduino Yes ATmega328[27]

(ATmega168 before v3.0[33])

16 MHz minimal 1.70 in × 0.73 in [ 43.18 mm × 18.54 mm ] USB FTDI FT232R[34] 5 V 16/32 0.5/1 1/2 14 6 8 May 15, 2008[35]
Arduino Nano

This small USB-powered version of the Arduino uses a surface-mounted processor.

LilyPad Arduino[36] Arduino Yes ATmega168V or ATmega328V 8 MHz wearable 2 in ⌀51 mm ⌀ 2.7-5.5 V 16 0.5 1 14 6 6 October 17, 2007[37]
LilyPad Arduino

This minimalist design is for wearable applications.

Arduino Pro [38] Arduino Yes ATmega168 or ATmega328[38] 16 MHz Arduino 2.05 in × 2.1 in [ 52.1 mm × 53.3 mm ] UART Serial, I2C(TWI), SPI FTDI 5 V or 3.3 V 16/32 0.5/1 1/2 14 6 6
Arduino Pro

Designed and manufactured by SparkFun Electronics for use in semi-permanent installations.

Arduino Mega ADK[39] Arduino Yes ATmega2560[25] 16 MHz Mega 4 in × 2.1 in [ 101.6 mm × 53.3 mm ] 8U2[22]

MAX3421E USB Host

5 V 256 4 8 54 14 16 July 13, 2011[28]
Arduino Esplora[40] Arduino Yes ATmega32U4[16] 16 MHz 6.5 in × 2.4 in [ 165.1 mm × 61.0 mm ] 32U4[16] 5 V 32 1 2.5 December 10, 2012 Analog joystick, four buttons, several sensors, 2 TinkerKit inputs and 2 outputs, LCD connector
Arduino Micro[41] Arduino Yes ATmega32U4[16] 16 MHz Mini 0.7 in × 1.9 in [ 17.8 mm × 48.3 mm ] 5 V 32 1 2.5 20 7 12 November 8, 2012[42]
Arduino Micro

This Arduino was co-designed by Adafruit.

Arduino Pro Mini Arduino Yes ATmega328 8 (3.3 V)/16 (5 V) MHz Mini 0.7 in × 1.3 in [ 17.8 mm × 33.0 mm ] Six pin serial header 3.3 V / 5 V 32 1 2 14 6 6 Designed and manufactured by SparkFun Electronics.
Serial Arduino[43] Arduino Yes ATmega8[44] 16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] DE-9 serial connection native
Arduino Serial

The first board labelled "Arduino".

Arduino USB[45] Arduino Yes ATmega8[44] 16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] USB FTDI FT232BM
Arduino USB v2.0
Arduino USB v2.0
Changed: USB replaces RS-232 interface, Improved: Arduino can be powered from host
Arduino Extreme[45] Arduino Yes ATmega8[44] 16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] USB The Arduino Extreme uses many more surface mount components than previous USB Arduino boards and comes with female pin headers.[45]
Arduino NG (Nuova Generazione)[45] Arduino Yes ATmega8[44] 16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] USB FTDI FT232RL
Arduino NG
Improved: FT232BM has been replaced by FT232RL to require fewer external components, LED on pin 13 added
Arduino NG plus Arduino Yes ATmega168[33] 16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] USB
Arduino BT (Bluetooth)[46] Arduino Yes ATmega168[33]

ATmega328[27]

16 MHz Arduino 3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ] Bluetooth Bluegiga WT11 Bluetooth 5 V 32 1 2 14 4 6 October 22, 2007[47]
Arduino BT

Similar to the Arduino NG, this has a Bluetooth module rather than a serial interface.[46] Programming is carried out via Bluetooth.

Arduino Diecimila[48] Arduino Yes ATmega168 (DIP-28)[33] 16 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB FTDI 5 V 16 0.5 1 14 6 6 October 22, 2007[47]
Arduino Diecimila
Improved: Host is able to reset the Arduino, pin headers for reset and 3.3 V, low dropout voltage regulator allows lower voltage on external power source
Arduino Duemilanove (2009)[49] Arduino Yes ATmega168,[33] ATmega328P

(ATmega328 for newer version)

16 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] USB FTDI 5 V 16/32 0.5/1 1/2 14 6 6 October 19, 2008[50]
Arduino Duemilanove, an early production example in orange

Improved: automatically switching between USB and external power, eliminating jumper

Arduino Mega[51] Arduino Yes ATmega1280[52] 16 MHz Mega 4 in × 2.1 in [ 101.6 mm × 53.3 mm ] USB FTDI 5 V 128 4 8 54 14 16 March 26, 2009[53]
Arduino Mega

Uses a surface-mounted ATmega1280 for additional I/O and memory.[54]

Arduino Mini[55] Arduino Yes ATmega168[33] (Pro uses ATmega328) 8 MHz (3.3 V model) or 16 MHz (5 V model) 0.7 in × 1.3 in [ 17.8 mm × 33.0 mm ] 5 16 0.5 1 14 6 6 August 23, 2008[56]
Arduino Mini

This miniature version of the Arduino uses a surface-mounted processor.

Canaduino Uno Bone[permanent dead link] Universal Solder

(universal-solder.com)

Yes ATmega328P-PU 16 MHz Do-It-Yourself Arduino Uno R3 compatible footprint and connections.

Additional features:

  • 5V, 1.5A LDO voltage regulator with heat sink
  • 3.3V, 250mA LDO voltage regulator
  • 6 to 35 V DC power supply
  • LEDs and voltage regulator can be disabled to safe on current
  • screw terminal block for power supply
ST1 Sanjay Technologies (sanjaytechnologies.co.in)[57] Yes ATmega328 16 MHz Compatible With Arduino Uno Rev3 - Added features:

Compatible with Arduino Uno R3.

ST Freeduino Robotics Board Sanjay Technologies (sanjaytechnologies.co.in)[58] Yes ATmega328 16 MHz Compatible With Arduino with servo ports - Added features:

External DC power socket (7vdc to 20vdc) or USB powered. On board 5V regulator with heatsink area for efficient 1000mA output. Has built in ICSP port for on the fly programming (P1). Robotics Ready (Has 4 Servo ports P3 and P2).

GSTduino Green System Technology[59] Yes ATmega328 16 MHz 55 mm x 45 mm 32 1 2 Added features:

Powered via the micro USB connection, or 2.8V – 5.5V battery connector

Serial communication on pin D0 (RX) and pin D1 (TX). used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the FTDI USB-to-TTL Serial chip. By sliding the switch (S1), RX/TX pins can be re-routed to Bluetooth UART connector.

Linduino One Linear Technology Corporation[60] Yes ATmega328 16 MHz Compatible with Arduino Uno. Galvanically isolated USB interface provided by onboard LTM2884 USB Isolation module.
InVentor UNO[61] Ventor Technologies[62] Yes ATmega328P-PU 16 MHz Added Features:
  • Single sided with SMD and TH components
  • 5 V and 3.3 V LDO onboard
  • USB to serial PL2303 instead of ATmega16U2
  • 16 MHz Crystal Oscillator
  • Shield compatible
  • Auto Power source selection circuit
InvIoT U1 InvIoT.com[63] ATmega328P-PU 16 MHz
inviot U1 (arduino-compatible) all-in-one board with LCD, rotary encoder, RTC DS3231, EEPROM, buzzer, push buttons, RGB Led, NRF24 plug, and ESP8266 plug. More
Added Features:
  • ATmega328P-PU with UNO bootloader
  • LCD 20x4 2004
  • Rotary encoder
  • 2x push buttons,
  • RGB Led, power led
  • Buzzer
  • RTC clock DS3231
  • EEPROM
  • NRF24 Plug
  • ESP8266 Plug
  • SD card
  • Size 140mm x 65mm
Bluno DFRobot.com ATmega328 16 MHz Added Features:
  • Built in TI CC2540
  • Bluetooth 4.0 Ready
AVR.duino U+ SlicMicro.com ATmega328 16 MHz
Compatible With Arduino Uno Rev3
Added Features:
  • SlicBus Port (Serial + Power)
  • Crystal Oscillator (Real Time Accuracy)
  • On board test with Button/LED/Trimmer
  • A6 and A7 available
SainSmart UNO[64] SainSmart[65] ATmega328 16 MHz
Compatible With Arduino
SainSmart Mega 2560[66] SainSmart[65] ATmega2560[25] 16 MHz
Compatible with Arduino
Freaduino MEGA2560[67] ElecFreaks[68] ATmega2560[25] 16 MHz
  • Arduino Mega compatible
  • 3.3 or 5 V selectable
  • More efficient switching power supply with 7-23 V input
  • Mini-USB connector
  • Can source 2 A at 5 V and 800 mA at 3.3 V
SainSmart UNO R3[69] SainSmart[65] ATmega328-AU 16 MHz
Development board compatible with Arduino UNO R3
Controller: SMD MEGA328P-AU; A6/A7 port added; 3.3 V/5 V supply voltage and I/O voltage switch.
AVR-Duino[70] TavIR[71] Another Arduino/Mega compatible board.
Brasuíno[72] Holoscópio[73] ATmega328-AU 16 MHz Based on the Uno with rearranged LEDs and reset button, mini-USB connector, and altered pin 13 circuitry so that the LED and resistor do not interfere with pin function when acting as an input. The Brasuíno was designed using KiCad, and is licensed as GPLv2.
ChibiDuino2[74] TiisaiDipJp[74] ATmega328 16 MHz
Japanese Arduino compatible kit using Uno board setting. Includes two mini-B USB sockets, 1602 LCD socket, 5 V or 3.3 V power selection, breadboard area.
Cosmo Black Star[75] JT5[76] ATmega328 16 MHz Arduino layout-compatible board. Based on the Arduino Duemilanove.
CraftDuino[77] Manufactured and sold by RoboCraft Team. 16 MHz
CT UNO Cytron Technologies ATmega328P 16 MHz CT-UNO Features:
  • Arduino Uno compatible.
  • SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader.
  • USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable).
  • TX, RX, Power, pin 13 LEDs are moved to edge.
  • Utilize USB Micro-B socket.
  • Extra pads with standard 0.1" (2.54 mm) pitch to pitch.
CT ARM (Cytron ARM Cortex M0) Cytron Technologies NUC131LD2AE (32-bit ARM Cortex-M0) 50 MHz Arduino 2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ] 5 V 64 4 8 20 16 6 CT-ARM Features:
  • Microcontroller: NUC131LD2AE (32-bit ARM Cortex-M0)
  • Operating voltage: 5 VDC
  • Flash size (program memory): 64 KB
  • SRAM size: 8 KB
  • Digital I/O: 20 (16 PWM)
  • Analog input (ADC): 6
  • UART: 5 + 1
  • Clock Speed: 50 MHz
  • Compatible with Arduino IDE.
Diavolino[78] Evil Mad Scientist Laboratories Arduino layout-compatible board, designed for use with a USB-TTL serial cable.
DuinoBot v1.x[79] RobotGroup Argentina[80] ATmega32U4 16 MHz Arduino fully compatible board, with integrated power supply and controllers designed for robotics. Compatible as well with the system "Multiplo"
eJackino[81] Kit by CQ publisher in Japan. Similar to Seeeduino, eJackino can use Universal boards as Shields. On back side, there is a "Akihabara station" silk, just like Italia on Arduino.
gizDuino Version 5.0V e-gizmo ATmega328 16 MHz Arduino Compatible

USB to serial made by prolific

locally made in the Philippines.

Elektor Platino[82] universal AVR board Elektor ATmega8, ATmega16, ATmega32, ATmega88, ATmega164, ATmega168, ATmega324, ATmega328, ATmega644, ATmega1284 Platino is an Arduino compatible board that supports 28-pin and 40-pin AVR devices. The board features multiple footprints for user interface elements like LCDs, pushbuttons, rotary encoders, LEDs and buzzer, supported by an extensive library. Bootloaders are available for all supported processors. On its backside are Arduino shield compatible connectors plus other extension connectors.
fayaduino Series[83] Manufactured and sold by Taiwan-based kit company fayalab, with 100% compatible design to Genuino/Arduino. fayalab[84]
Freeduino MaxSerial[83] Manufactured and sold assembled or as a kit by Fundamental Logic until May 2010. A board with a standard DE-9 serial port.
Freeduino SB[85] Solarbotics Ltd.[86] ATmega328 16 MHz Solarbotics Freeduino Compatible with the Duemilanove.
Freeduino Through-Hole[87] Manufactured and sold as a kit by NKC Electronics. The design avoids surface-mount soldering.
Illuminato Genesis[88] ATmega644 64 4 Provides 64 KB of flash, 4 KB of RAM and 42 general I/O pins. Hardware and firmware are open source.
InduinoX[89] Simple Labs[90] ATmega168/ATmega 328/ATmega 8 A low cost Arduino clone using the ATmega168/ATmega 328/ATmega 8 and designed for prototyping, it includes onboard peripherals such as an RGB LED, switches, IR Tx/Rx and DS1307 real-time clock(RTC).
Japanino[91] A kit by Otonano Kagaku publisher in Japan. ATmega168[33] The board and a POV kit were included in Vol. 27 of the eponymous series. It is unique in having a regular size USB A connector.
1000Pads Luigino[92] Minimalistic version of Arduino: small, without serial converter. Available as a kit, board only or assembled. Smaller than Arduino, with different footprint.
Luigino328[93] ATmega328 16 MHz It has an improved automatic voltage selector, resolves problems during programming caused by shields that use the serial port, with an automatic serial port selector, and has the LM1117 voltage regulator.
metaboard[94] Developed by Metalab, a hackerspace in Vienna. Designed to have a very low complexity and price. Hardware and firmware are open source.
Rascal Rascal Micro[95] AT91SAM9G20 (ARM9) It is compatible with Arduino shields, but it is programmed in Python rather than C++. It has an embedded webserver.
Raspduino[96] Bitwizard[97] ATmega328 16 MHz Fully Arduino compatible board, that fits perfectly on a Raspberry Pi, and can be programmed through the Raspberry Pi's serial interface. It also breaks out the Raspberry Pi's SPI and I2C interfaces, or can be used as a stand-alone Arduino when powered with the external power header.
Romeo 2012[98] DFRobot[99] ATmega328 16 MHz An all-in-one Arduino with motor controller. Compatible with the Arduino Uno. Romeo 2012
Roboduino[100] Designed for robotics. All connections have neighboring power buses (not pictured) for servos and sensors. Additional headers for power and serial communication are provided. It was developed by Curious Inventor, LLC.
Seeeduino[101] SeeedStudio v2.21 (ATmega168 or ATmega328)

v3.0 (ATmega328)

Derived from the Diecimila. This photo is v1.0b.
SunDuino[102] Lothar Team Arduino PRO Compatible boards. (Poland) ATmega8/88/168/328/16/32/324/644 and PIC18F2550/4550 PIC32MX320F128 and ButterFLY, STM32Discovery Another Arduino compatible board, software- and hardware-compatible.
TwentyTen[103] Freetronics[104] Freetronics TwentyTen Based on the Duemilanove, with a prototyping area, rearranged LEDs, mini-USB connector, and altered pin 13 circuitry so LED and resistor do not interfere with pin function when acting as an input.
UDOO SECO Inc. Atmel SAM3X8E Android-Linux-Arduino compatible board.
Volksduino[105] Applied Platonics[106] A low cost, high power, shield-compatible, complete Arduino-compatible board kit. Based on the Duemilanove, it comes with a 5 V / 1 A voltage regulator (optional 3.3 V regulator). Designed for low component count and for ease of assembly.
Wiseduino[107] Includes a DS1307 RTC with backup battery, a 24LC256 EEPROM and a connector for XBee adapter for wireless communication.
Xaduino OBDIIworld ATXmega128A3U 32 MHz 8 8/16 bit Xmega core @ 32 MHz. 8 KB SRAM. 37 Digital I/O. 3.3 V. 2 DAC. Output 3.3 V pin: 500 mA, 5 V 500 mA.
YourDuinoRoboRED Yourduino.com[108] Atmel 328 Includes 14 color-coded 3-pin connectors for direct cable connection of servos, electronic bricks, etc., and 6 color-coded3-pin connectors to Analog inputs for electronic bricks, etc. Provides improved 3.3 V regulator supplying 500 mA, and optional 3.3 V operation. Switching regulator provides 5 V 2 A from up to 20 V external supply.

YourDuinoRobo1[109] Yourduino.com[108] Atmel 328 Includes 6 color-coded 3-pin connectors for direct cable connection of servos, electronic bricks, etc., and 6 3-pin connectors to Analog inputs for electronic bricks, etc. Provides improved 3.3 V regulator supplying 500 mA, and optional 3.3 V operation.
ZArdino[110] A kit created by Peter Ing ATmega328 16 MHz A South African Arduino-compatible board derived from the Duemilanove, it features mostly through-hole construction except for the SMD FT232RL IC, power selection switches, option for a Phoenix power connector instead of DC jack, extra I/O pads for using Veroboard as shields. Designed for easy assembly in countries where exotic components are hard to find. PCB layout and Board now available on Circuitmaker as Open Source Hardware
Zigduino[111] Logos Electromechanical[112] ATmega128RFA1 Integrates Zigbee (IEEE 802.15.4). It can be used with other 802.15.4 network standards as well as Zigbee. It is the same shape as the Duemilanove, includes an external RPSMA jack on the side of the board opposite the power jack, and is compatible with shields that work with other 3.3 V boards.
EtherTen[113] Freetronics ATmega328P 16 MHz Fixed SPI behaviour on Ethernet chip, D13 pin isolated with a MOSFET of which can also be used as an input.
EtherMega[114] Freetronics ATmega2560[25] 16 MHz Fixed SPI behaviour on Ethernet chip, Micro SD card slot, D13 pin isolated with a MOSFET of which can also be used as an input.
USBDroid[115] Freetronics ATmega328P 16 MHz Can act as a host for an Android device and is compatible with the Android Open Accessory Development Kit, Micro SD card slot, D13 pin isolated with a MOSFET of which can also be used as an input.
Eleven[116] Freetronics ATmega328P 16 MHz Arduino Uno compatible, D13 pin isolated with a MOSFET of which can also be used as an input.
KitTen[117] Freetronics ATmega328P 16 MHz Includes both 3.3 V and 5 V regulators for shields, D13 pin isolated with a MOSFET of which can also be used as an input. Can be connect to Arduino using CAT5 cable.[118]
EtherDue[119] Freetronics ATSAM3X8E [10] (Cortex-M3) Arduino Due with onboard Ethernet, software-compatible with Arduino Ethernet Shield, D13 pin isolated with a MOSFET of which can also be used as an input.
TAIJIUINO Due Pro [120] Elechouse ATSAM3X8E [10] (Cortex-M3) Mostly compatible with Arduino Due. Includes RMII signals via a connector to allow access to the microcontroller's native Ethernet MAC.
ShieldBuddy TC275 [121] Hitex UK Infineon Aurix TC275TP 200 MHz 4000 550 Uses Arduino Due form factor and largely compatible pin allocation. Runs at 5V but can be modified to run at 3V3. Triple-core, 32-bit, 200 MHz Aurix processor. 4 MB FLASH, 550k SRAM, 128k DataFlash. Optional CIC61508 safety monitor. Arduino IDE supported via add-in, plus Eclipse-based tools with multicore debugger.
MBZ Pro Wifi MaxBlitz ATmega328P-PU

MBZ Pro Mega is an Arduino compatible stand-alone board with a prototyping area and built-in Wifi. Featuring a compact design, it helps to shrink Arduino projects and make it permanent.

  • Dimensions 3.56" x 2.24" (90.5mm x 56.9mm)
  • Compatible with Arduino Shields
  • Prototyping area to solder components and modules
  • 2 voltage regulators: 5V-1A and 3.3V-800mA
  • I2C bus header, compatible with RTC breakouts modules such as DS1307 and DS3231
  • Internet connection via ESP8266 module (model ESP-01)
  • Integrated 5v to 3.3v level shifter (IC 74HC4050)
  • Digital ports D3, D4, D9, D10, D11 and D13 are available both in 5V and 3.3V
  • Header for FTDI USB to Serial adapter to upload the sketches.
Io:duino[122] Railstars AT90CAN128 USB with FTDI serial chip Adds built-in CAN support through the AT90CAN128 micro processor, dual RJ45 jacks, and optional bus termination. Designed specifically for model railroading applications using the OpenLCB networking protocol, the hardware is sufficiently generic for use with other low-speed CAN networks. OUT OF BUSINESS 17 Dec 2014. All designs supposedly on GitHub, but Io:duino is not present. (https://web.archive.org/web/20160516101800/http://railstars.com/blog/)
DFRobotShop Rover[123] ATmega328 This is a minimalist tracked platform based on the Arduino Duemilanove. Has an ATmega328 with Arduino bootloader, a dual H-bridge and additional prototyping space and headers. It is compatible with many shields, though four digital pins are used when operating the motor controller. Has an onboard voltage regulator, additional LEDs, a temperature sensor, and a light sensor. Part of the DFRobotShop Rover kit.
Faraduino[124] Developed by Middlesex University Teaching Resources.[125] ATmega328 USB with FTDI serial chip Simple shield-compatible board, with onboard discrete transistor H-bridges and screw terminals to drive two small DC motors from pins 4–7.[126] Has headers for three servos on pins 9-11. Also sold with the Faraduino buggy kit[127] and Faraconnect shield[128] as a simple school-level teaching robot.
Motoruino[129] Guibot ATmega328 Serial only, 6 pin header Has L293D twin H-bridge.
Alternator Regulator [130] ATmega64M1 USB with FTDI serial chip Open source Alternator Regulator suitable for 12v to 48v systems with many different battery chemistries (Lead-Acid, LiFeP04, etc..). Multi stage (3, 4), fully configurable. Features battery voltage and current measurement to assure complete and safe battery charging as well as CAN support for communications with other devices and status output (including "NMEA2000" like messages).

Programmable using Arduino IDE with ATmegaxxM1 board type ( https://github.com/thomasonw/ATmegaxxM1-C1 )

More (including source and CAD files):

http://arduinoalternatorregulator.blogspot.com/

ArduPilot[131] An Arduino-compatible board designed for auto-piloting and autonomous navigation of aircraft, cars, and boats. It uses GPS for navigation and thermopile sensors or an IMU for stabilization.
ArduIMU[131] An Arduino-compatible board designed for Inertial Measurement and Inertial Navigation of aircraft, cars, and boats. It uses the ATmega128RFA1 and a variety of sensors IMU for various applications.
FlyDuino Mega[132] Paul Bake ATmega 2560[25] Serial only, 6 pin header An Arduino Mega 2560 compatible board designed for auto-piloting and autonomous navigation of multirotor aircraft. Designed to be stacked with sensor bobs and boards with several breakout boards available.
Colibri[133] JT5[76] ATmega168[33] Serial only Universal Platform for Wireless Data Transmission in the Frequency Band 868 MHz. The Board Combines Features Arduino Mini and the Radio EZRadioPRO for Receiving and Transmitting Data. With dataFlash.
JeeNode[134] Jeelabs ATmega328 6 pin header Includes a wireless radio module, called the RFM12B by HopeRF
ArduPhone[135] Freetronics ATmega1284P USB Cellular phone kit, ADH8066 GSM module, Micro SD slot, 16 key matrix keyboard, LiPo charger and microphone/speaker connectors.
WTFDUINO[136] Calum Knott ATmega328P USB & CH340G "The world needs a more confusing Arduino"
Tah[137] Revealing Hour Creations[138] ATmega32U4 USB Stock Arduino Leonardo With a built-in BLE(Bluetooth Low Energy) 4.0. Has arduino compatibility with its breakout shield

.

WIOT Archived 2014-01-11 at the Wayback Machine ubld.it ATmega32U4 USB WIOT is an Open Source, rechargeable, Li-ion battery powered, Arduino compatible, development board designed around the ATmega32U4 Processor and ESP8266 Wi-Fi Module.

XLR8 Alorium Technology Altera MAX10 10M08 FPGA USB FPGA-based drop-in replacement for Arduino UNO R3; offers faster clock rates and overall applications speed, higher-performance through vendor-supplied hardware-specific library functions utilizing FPGA; half of FPGA's space remains available for further customizations including ones written by end user
Controllino Mini[139] Controllino ATmega328 USB 12V or 24V 8x Analog/Digital Inputs, 6x Relays Outputs, 8x Digital Outputs A successful Kickstarter project
Controllino Maxi[139] Controllino ATmega2560 Ethernet/USB 12V or 24V 12x Analog/Digital Inputs, 10x Relays Outputs, 12x Digital Outputs A successful Kickstarter project
Controllino Mega[139] Controllino ATmega2560 Ethernet/USB 12V or 24V 12x Analog/Digital Inputs, 10x Relays Outputs, 12x Digital Outputs A successful Kickstarter project
FA-DUINO 12RA[140] Comfile Technology Mega2560 RS232 24V 8x Inputs, 4x Relays
FA-DUINO 24RA[140] Mega2560 RS232 24V 16x Inputs, 8x Relays
ARDBOX[141] Industrial Shields ATmega32U4 USB 12-24V 10x Input, 10x Output Uses Arduino LEONARDO Board
Industruino[142] Industruino ATmega32U4 or ATmega AT90USB1286 USB 6.5-32V 8x shared digital Input/Output, 4x Analog input, 2 Analog output Arduino compatible industrial controller housed in DIN rail casing, designed for industrial automation in small to medium-sized businesses.
Iono[143] Sfera Labs No integral board USB / 6 pin header 11-30V 6x Input, 6x Output iono is a general-purpose industrial controller based on Arduino, suitable for professional use (e.g. industrial automation, building automation). It features wide-range power supply, analog/digital inputs with robust protection circuits, power relays with double-winding latching bistable coils, 0÷10V analog output, DIN rail case.
Ardweeny[144] Solarbotics An inexpensive, even more compact breadboardable device.
Banguino[145] Dimitech ATmega328
Banguino
Enhanced Arduino-Uno-compatible in standard PLCC68 socket
SAM15x15 avdweb SAMD21G18 34 24 14
Banguino
Mini SAMD21 development board 15x15mm (Arduino compatible)
  • Digital I/O pins: 34
  • PWM outputs: 24
  • Analog inputs: 14
Bare Bones Board[146] (BBB) and Really Bare Bones Board[147] (RBBB) Modern Device Compact inexpensive Arduino-compatible board suitable for breadboarding.
BBFUINO (Breadboard Friendly Arduino Compatible) Cytron Technologies ATmega328P BBFuino come with the ATmega328 controller, loaded with Optiboot (Arduino UNO's bootloader), compatible with Arduino IDE and sample code, design to fit breadboard for prototyping and learning, lower down the cost by taking out the USB to UART IC, so the board has the basic component to operate.
BlockDuino[148] Blockduino ATmega8 ATmega328 An Arduino-Diecimila-compatible board with serial connection to Blocks (shields).[149]
Boarduino[150] Adafruit ATmega168 or ATmega328
Boarduino
An inexpensive Arduino-Diecimila-compatible board made for breadboarding.
Breaduino[151] Applied Platonics[106] A complete, very low cost Arduino-compatible kit that can be assembled entirely on a breadboard.
Croduino series[152] e-radionica.com ATmega328 Inexpensive series of fully compatible Arduino board for education, hobbyist and automatisation, specially in Croatia.
Cardboarduino[153] ATmega168[33] Inspired by the Paperduino, an ultra low-cost Arduino compatible, built on printed posterboard, rather than a PCB.
Crumbuino-Nano[154] chip45.com/[155] ATmega328 The Crumbuino-Nano is a low-cost module comparable to the Arduino-Nano and can be used as Arduino-Nano in the Arduino-IDE. The Arduino bootloader is preloaded, hence the module is ready-to-use. The documentation shows the pin mapping of Arduino-naming to module pinout.
Crumbuino-Mega[156] chip45.com/[155] ATmega2560[25] The Crumbuino-Mega is a low-cost module comparable to the Arduino-Mega 2560 and can be used as Arduino-Mega 2560 in the Arduino-IDE. The Arduino bootloader is preloaded, hence the module is ready-to-use. The documentation shows the pin mapping of Arduino-naming to module pinout.
Cuteduino Cytron Technologies ATtiny85 Cuteduino Features:
  • ATtiny85 on board, 8 KB of flash, 512 byte of SRAM, 512 bytes of EEPROM.
  • Internal oscillator runs at 16 MHz.
  • USB bootloader so you can program it with the modified version Arduino IDE (from DigiSpark).
  • Micro-B USB jack for power and/or USB uploading.
  • 5 GPIO - 2 shared with the USB interface. The 3 independent I/O pins have 1 analog input (ADC) and 2 PWM output as well.
  • Hardware I2C / SPI capability for breakout & sensor interfacing.
  • Works with many basic Arduino libraries including RainbowBit library.
Digispark[157] Digistump[158] ATtiny85
Digispark
Digispark
Built-in USB plug. Requires special version of the Arduino IDE.
DragonFly[159] ATmega1280[52] A compact board with Molex connectors, aimed at environments where vibration could be an issue. DragonFly features the ATmega1280 and have all 86 I/O lines pinned out to connectors.
Femtoduino[160][dead link] Femtoduino[161] ATmega328P-MU
Femtoduino PCB vs Dime
An ultra-small (20.7x15.2 mm) Arduino compatible board designed by Fabio Varesano. Femtoduino is currently the smallest Arduino compatible board available.[citation needed]
Freeduino USB Mega 2560[162] Bhasha Technologies[163] ATmega2560[25]
Freeduino USB Mega 2560, designed in India with Male headers (coming soon with Female Headers). Suitable for use in project, R&D, device and applications
Freeduino USB Mega 2560 is a cost-effective and 100% pin and software compatible to the popular Arduino Mega 2560. Uses through hole components and has male headers.
Freeduino Lite v2[164] Bhasha Technologies[163] ATmega8/168/328 Freeduino Lite v2 is a low cost, Freeduino with no USB and Serial port. Needs FTDI USB Cable or FTDI Breakout board for programming. Uses through hole components and has male headers.
Freeduino Serial[165] Bhasha Technologies[163] ATmega8/168/328 Freeduino Serial is a low cost Freeduino board with serial DB9 connector. Uses MAX232 Chip for Serial connectivity.
Freeduino NANO[161] Bhasha Technologies[163] ATmega328
Freeduino nano designed in India, completely breadboard friendly, elegant and compact design.
Freeduino Nano is a low cost Arduino Nano compatible board with mini USB connector using SMD components Freeduino Nano.
iDuino[160][dead link] A USB board for breadboarding, manufactured and sold as a kit by Fundamental Logic.
IMUduino[166] Femtoduino.com[167] ATmega32U4 The world's first wireless 3D position, inertia, and orientation beacon. Designed in the San Francisco bay area, this board provides a 10-DoF IMU with on-board ATmega32U4 chip (the same as the Arduino Leonardo).
JeeNode[168] JeeLabs[169] ATmega328P
JeeNode
Low-cost, low-size, radio-enabled Arduino-compatible board running at 3.3 V. Inspired by the Modern Device RBBB (above) with a HopeRF RFM12B wireless module and a modular I/O design supporting a wide range of interfaces.[170]
LCDuino[171] Geppetto Electronics ATmega328P A combination of an ATmega328P and an I2C based RGB backlit LCD interface (software compatible with the Adafruit RGB LCD shield), along with a USB serial programming interface done as a "backpack" module for the LCD.
LEDuino[172] A board with enhanced I2C, DCC decoder and CAN-bus interfaces. Manufactured using surface mount and sold assembled by Siliconrailway.
Moteino[173] LowPowerLab[174] ATmega328P
Moteino
An SD-card size wireless-enabled breadboard friendly Arduino compatible board running at 16 MHz/3.3 V. It can mate with either an RFM12B or RFM69W/HW/CW transceiver from HopeRF, allowing very low cost wireless communication (also available without a transceiver).
These are the different types of available Moteino boards and their transceiver options.
These are the different types of available Moteino boards and their transceiver options.
Programmable from the Arduino IDE through an FTDI cable/adapter, or directly through the USB interface (Moteino-USB revision). Moteino runs DualOptiboot,[175] a custom version of Optiboot that allows wireless programming when external FLASH memory is present. The new MoteinoMEGA based on ATmega1284P offers more I/O, an extra hardware serial port, a massive 128 KB of flash for sketches and 16 KB of RAM.
NavSpark[176] SkyTraq[177] Venus822 (Leon3 SPARC V8 compatible, 100 MHz 32-bit RISC) The modified Arduino IDE allows the compiled user sketch to be uploaded onto the processor either with or without the proprietary GNSS software. NavSpark has 17 GPIO pins, which include two UARTs, 1 I2C, 1 SPI, 1 PWM, and a trigger. The first UART is usually used by the GNSS software to output NMEA 0183 data, although this can be disabled. This UART communicates over USB through a PL2303 serial converter and the transmit output is also made available on a pin. A 1 pulse per second signal is produced on a dedicated pin when a valid fix has been made.

There is a GPS-only version, a combined GPS/GLONASS version, and a GPS/Beidou version. An adaptor board adds a JST connector for a lithium-ion battery, a charger for the battery, and a microSD card slot connected to the SPI pins.

NB1A[178] An Arduino-compatible board that includes a battery backed up real-time clock and a four channel DAC. Most Arduino-compatible boards require an additional shield for these resources.
NB2A[179] Sanguino-compatible board that includes a battery backed up real-time clock and a two channel DAC. Sanguino's feature the ATmega644P, which has additional memory, I/O lines and a second UART.
Nymph[180] ATmega328P A compact board with Molex connectors, aimed at environments where vibration could be an issue.
Oak Micros om328p[181] An Arduino Duemilanove compacted down to a breadboardable device (36 mm x 18 mm) that can be inserted into a standard 600 mil 28-pin socket, with USB capability, ATmega328P, and 6 onboard LEDs.
OpenTag[182] Loggerhead Instruments ATmega328P OpenTagOpenTagArduino-compatible microSD motion datalogging board with accelerometer, magnetometer, gyroscope, pressure, temperature and real-time clock.
Paperduino[183] ATmega168 An ultra low-cost Arduino compatible, built on a printed paper and cardboard substrate, rather than a PCB.
Photon[184] Particle STM32F205 [185] (Cortex-M3) An ARM-based Wi-Fi development kit with a Broadcom BCM43362 Wi-Fi chip supporting 802.11b/g/n.
PicoDuino [186] Peter Misenko ATtiny85
PicoDuino size demonstration.
  • Requires special version of the Arduino IDE (Digispark IDE recommended)
  • Digispark compatible SW/HW
  • Trinket compatible HW (due to bootloader USB vid restriction)
  • Ultra small board 22 mm x 12 mm
  • RGB led
  • Relay/motor driver
  • Reset button.
Pro Micro[187] Sparkfun and clones ATmega32U4 A popular low-cost compact Arduino-compatible board. Available in 3.3v and 5v versions.
Rainbowduino[188] An Arduino-compatible board designed specifically for driving LEDs. It is generally used to drive an 8x8 RGB LED matrix using row scanning, but it can be used for other things.
Sanguino[189] ATmega644
Sanguino
An open source enhanced Arduino-compatible board that uses an ATmega644P instead of an ATmega168. This provides 64 KB of flash, 4 KB of RAM and 32 general I/O pins in a 40 pin DIP device. It was developed with the RepRap Project in mind.
Seeeduino Mega[190] SeeedStudio ATmega2560[25] Arduino Mega compatible board with 16 extra I/O pins and the same a board size as the Arduino Uno. As with the Arduino Mega, most shields that were designed for the Duemilanove, Diecimila, or Uno will fit, but a few shields will not fit because of interference with the extra pins.
Sippino[191] SpikenzieLabs A miniature Arduino compatible board with all of the digital and analog I/O pins brought out into a single line of pins (SIP). Available as a kit, intended for use with a solderless breadboard.
SODAQ Mbili[192] SODAQ ATmega1284P
SODAQ, an Arduino Compatible Solar Powered sensor board
The Raspberry Pi-sized SODAQ board is built for Solar Powered Data Acquisition. It is fitted with a Lipo charge controller and 12 Grove sockets for plug and play prototyping. It runs at 3.3 V and 8 MHz. It also comes with a DS3231 Real Time Clock and 16 Mbit serial flash for data logging. Its "bee" socket can use a range of different modules, like Xbee, RFbee, Bluetoothbee and GPRSbee to make the board communicate. The latest version has the powerful ATmega1284P microcontroller with 128 KB program space and 16 KB RAM and is still Arduino IDE compatible.

Specifications:

  • Power supply by LiPo battery (3.7 V) or via Micro USB connector
  • Solar charge controller with JST connector for Solar Panel up to 2.5 W
  • Battery Monitor
  • DS3231 Real Time Clock and Temperature sensor, clock backup powered by LiPo battery
  • On/Off switch. With the switch in Off position the solar charge circuit is still active and the RTC clock is still powered.
  • ICSP programming header
Sparrow[193] Open Home Automation ATmega328P Arduino compatible board designed specifically for RF mesh network experiments. It features 10 I/Os, a 10 pin ISP programming connector, a connector for a standard LCD display (in 4 bit mode) and a connector for a 2.4 GHz RF module.
Spider Controller[194] Arduino Mega compatible board designed specifically for robots requiring large numbers of servos. A built in 3 A switchmode power supply allows servos to plug directly into the board. Pin spacing allows making custom shields from standard prototype board.
Stickduino[195] Similar to a USB key.
Teensy 2.0[196] PJRC ATmega32U4 8 bit AVR 16 MHz [197] 16 MHz
Teensy 2.0 microcontroller
Boards from PJRC.com that run most Arduino sketches using the Teensyduino software add-on to the Arduino IDE.
Teensy 2.0++[198] PJRC AT90USB1286 8 bit AVR 16 MHz[197] 16 MHz 128 8
Teensy++ 2.0 microcontroller
A slightly more powerful version of the Teensy 2.0. It has 46 I/O pins; 8 KB RAM; 128 KB of flash; 10-bit ADC; UART, SPI, I2C, I2S, Touch and other I/O capability.
Teensy 3.0[199] PJRC MK20DX128 32 bit ARM Cortex-M4 48 MHz[197] 48 MHz 128 16 A very small board based on the Freescale MK20DX128VLH5 CPU. It has 34 I/O pins; 16 KB RAM; 128 KB of flash; 16-bit ADC; 3xUARTs, SPI, I2C, I2S, Touch and other I/O capability. Version 3.0 is not recommended for new designs.
Teensy 3.1/3.2[200] PJRC MK20DX256 32 bit ARM Cortex-M4 72 MHz[197] 256 64 Same form factor as Teensy 3.0. Based on the Freescale MK20DX256VLH7 CPU. It has 34 I/O pins; 64 KB RAM; 256 KB of flash; 2x16-bit ADC; 12-bit DAC; 3xUARTs, SPI, 2xI2C, I2S, CAN Bus, Touch and other I/O capability. All digital pins are 5 volt tolerant. Teensy 3.2 adds a more powerful 3.3 volt regulator, with the ability to directly power ESP8266 Wifi, WIZ820io Ethernet and other power-hungry 3.3 V add-on boards.
Teensy LC[201] PJRC MKL26Z64VFT4 ARM Cortex-M0+ 48 MHz[201] 64 A lower cost version of the Teensy 3.1/3.2. It has 27 I/O pins; 64 KB of flash; 12-bit DAC; 3xUARTs, 2xSPI, 2xI2C, I2S, Touch and other I/O capability. I/O pins are not 5 V tolerant. No FIFOs on Serial 1 and Serial2. Fewer hardware timers.
TinyDuino[202] TinyCircuits[203] ATmega328P
TinyDuino
A fully capable Arduino platform smaller than a quarter, yet with all the power and functionality of the Arduino Uno board, including stackable shield support. The TinyDuino also support an option coin cell holder and has many expansion shields available.
TinyLily[204] TinyCircuits[203] ATmega328P
TinLily
A fully capable Arduino platform smaller than a dime, designed for e-textiles. Includes large sewtabs and a header for a USB adapter for communication and programming.
Trinket[205] Adafruit ATtiny85 Requires updates to Arduino IDE (or download special version) and driver under Windows. Includes regulator for battery power away from PC. Very low cost.
Wireless Widget[206] A compact (35 mm x 70 mm), low voltage, battery powered Arduino-compatible board with onboard wireless capable of ranges up to 120 m. The Wireless Widget was designed for both portable and low cost Wireless sensor network applications.
Whisper Node AVR[207] Wisen - Talk2 ATmega328P
A real ultra-low power board, capable of running of a single AA. The board counts with an efficient step-up regulator (MCP16251) and can be powered from 0.9V. The Whisper Node has a built-in RFM69 long-range sub-GHz radio and 4 Mbit Flash memory. The board can also run from a standard power supply and use the battery as backup. Additionally it can be upgraded to include a RTC chip or a high-voltage LDO.

On field tests the Whisper Node was able to communicate on distances over 1 km line-of-sight and can run for years on battery, making a great platform for remote sensing and IoT applications.

ZB1[208] An Arduino-compatible board that includes a Zigbee radio (XBee). The ZB1 can be powered by USB, a wall adapter or an external battery source. It is designed for low-cost Wireless sensor network applications.
SunDuino2[102] ATmega16/32/324/644 An open source enhanced Arduino-compatible board that uses an ATmega16/32/324/644 instead of an ATmega168. This provides 16/32/64 KB of flash, and 32 general I/O pins in a 40 pin DIP device.
OpenEnergyMonitor emonTx[209] ATmega328
EmonTx
An open-source low power wireless (RFM12B) energy monitoring node based on ATmega328 and JeeNode design and uses the Nanode (another Arduino compatible) design for their receiver.[210]
panStamp[211] panStamp[211] ATmega328
panStamps
Small low-power wireless motes and base boards. Communication library, configuration tools and automation applications are available for panStamps. These wireless miniatures can easily be hooked to different cloud data services via Lagarto,[212] an open automation platform developed for panStamps.[211]
Microduino[213][214] Microduino Studio ATmega168/328/644/1284 1" x 1.1" small, stackable, low-cost Arduino-compatible board with a uniformed U-shape 27-pin standard interface.
Versalino Uno[215] Virtuabotix ATmega328P
Versalino Uno 1.1
Compact board with pins in two similar layouts "Bus A" and "Bus B". 6 volt input 3.5 mm plug power. Programmed with FTDI.
LeoStick[216] Freetronics ATmega32U4 Compact version of the Arduino Leonardo (which can be plugged straight into a USB port without a cable) and has a buzzer and a 3-in-1 RGB LED.
Wattuino Nanite [217][218] Watterott electronic ATtiny85/ATtiny841 Very small size and microUSB plug for programming (Micronucleus USB Bootloader). Requires special board package for the Arduino IDE.
Wattuino Pro Mini PB[219] Watterott electronic ATmega328PB An Arduino Pro Mini compatible board with the new ATmega328PB. Requires special board package for the Arduino IDE.
PIC.duino Net SlicMicro PIC18F67J60 Ethernet or Serial

Pin compatible with Arduino but uses the Ethernet-enabled PIC microcontroller to connect to the Internet. Allows sending of email, display of javascript enabled webpages, and remote web based access and control from around the world.

Leaflabs Maple[220] LeafLabs[221] STM32 (Cortex-M3) 72 MHz USB
Leaflabs Maple
A 72 MHz 32-bit ARM Cortex-M3-based microcontroller (ST Microelectronics] STM32F103[222]) with USB support, compatibility with Arduino shields, and 39 GP I/O pins. Programmable with the Open Source Maple IDE,[223] which is a branch of the Arduino IDE. The Maple IDE includes both an implementation of the Arduino Language,[224] and lower-level native libraries (with support from the libmaple C library).[225] The more up-to-date Arduino_STM32[226] project allows use of the Maple, and other generic STM32 boards in version 1.6.12 of the Arduino IDE.
Microchip chipKIT Uno32, Max32, WF32, DP32 Digilent[227] PIC32 USB 32-bit MIPS-M4K PIC32MX processor boards (40-80 MHz). The Arduino libraries have been implemented natively for the PIC32MX and these kits run in a fork of the standard Arduino IDE, MPIDE[228] and are compatible to most shields.[229][230][231]
Microchip chipKIT Wi-Fire Digilent[227] PIC32MZ 200 MHz USB 32-bit MIPS-M4K PIC32MZ processor boards (200 MHz). The Arduino libraries have been implemented natively for the PIC32MZ and these kits run in a fork of the standard Arduino IDE, MPIDE[228] and are compatible to most shields.[229][230][231]
Freescale Freedom[232] Freescale[233] Kinetis-L (Cortex-M0+) 48 MHz USB A 48 MHz 32-bit ARM Cortex-M0+-based microcontroller (Freescale MKL25Z128VLK4[234]) with USB support, compatibility with Arduino shields and 64 GP I/O pins. Board embeds the new ARM OpenSDA debug and programming interface through USB and is compatible with the majority of the ARM IDE suppliers.
PRO Family[235] Coridium[236] ARM Cortex LPC1114 LPC1751 LPC1756 USB up to 200 MHz dual core ARM Cortex-M4F, ARM Cortex-M3 and ARM7TDMI-based shield-compatible boards, programmable in BASIC or C with Sketch support with open source MakeItC utilities. All boards have 5 V tolerant I/Os.
Energia Texas Instruments MSP430 USB The Energia project integrates this with the Arduino IDE.[237][238]
Sakura board[239] Renesas/Wakamatsu Tsusho Co., Ltd Renesas RX63N USB Web compiler with Sketch support,[240] Ethernet interface
HiFive1[241] SiFive SiFive E31 32 bit RISC-V USB 16000 16 19 9 0
HiFive1 board
Uno form factor, 5V and 3.3V, 19 digital I/O (9 PWM), 0 analogue in. 16 MB QSPI flash (execute in place, with 16 KB icache), 16 KB SRAM. Arduino IDE support with 16/256/320 MHz presets and port of Arduino library. Also works with standard C/C++, stdio, gdb from the shell. Hardware multiply (4 cycle) and divide (32 cycle).
DAQduino PICcircuit.com PIC18F2550 or

PIC18F2553

DAQduino is iCP12 usbStick that built in Arduino form of external ports connection. With these IO ports, user can easily plug in different type of 3rd party Arduino extension boards with direct connection to USB port and SmartDAQ software. Great tool for parallel USB IO control, signals monitoring (6 ch. oscilloscope) and data acquisition.
CIKU Cytron Technologies PIC18F4550 48 MHz 32 20 2 6 CIKU Features:
  • Comes with pre-programmed PIC18F4550 with USB bootloader.
  • PIC18F4550 running at 48 MHz (after PLL with 10 MHz external crystal).
  • 32 KB flash/program memory (~28 KB after bootloader).
  • 20 digital I/O pins.
  • 6 analog input pin.
  • 2 PWM output pin.
  • Extra pads with standard 0.1" (2.54 mm) pitch to pitch.
  • Program with MPLAB X IDE and XC8 compiler (library is open source and provided).
  • Program loading via USB HID, GUI from Microchip provided.
Chipino[242] Howtronics[243] PIC16F886-I/SP[244] Chipino is an electronics prototyping platform based on a Microchip PIC microcontroller. It was designed to use the same footprint and connection scheme as the official Arduino boards to allow Arduino shields to be used with Chipino.
Bambino 210 Microint USA NXP LPC4330 Dual core ARM Cortex-M4/M0, 264 KB SRAM, 4 MB Flash, mbed HDK, Arduino-compatible headers. The Bambino 210E has the same features as the 210, but adds a 10/100 Ethernet port, 8 MB Flash, microSD socket, and Xbee Socket
Cypress PSoC 4 Pioneer Kit (CY8CKIT-042) Cypress Cypress PSoC4 CY8C4245AXI-483 The PSoC 4 Pioneer Kit is a development platform enabling users to design with the ARM Cortex-M0 PSoC4 device family. The kit features the PSoC 4200 device family as the main processor and includes a PSoC 5LP (ARM Cortex-M3 processor) to perform programming and debugging. The kit is supported using PSoC Creator, which is a free IDE for embedded development targeting the PSoC 3/4/5LP device families. In the summer of 2013 Cypress supported the kit with a 100 projects in 100 days campaign on the community forums at Element14.
Arduino Shield Compatible Propeller Board[245] Parallax Parallax Propeller Based on the Parallax Propeller; interfaces with standard Arduino shields. The Propeller comes with a free IDE called "propeller tool", and an alternative IDE tool is available.[246]
Amicus18[247] PIC Amicus18 is an embedded system platform based on PIC architecture (18F25K20). Can be programmed with any programming language, though the Amicus IDE is free and complete.
Cortino[248] ARM STM32 Development system for a 32-bit ARM Cortex-M3-based microcontroller.
Pinguino[249] PIC Board based on a PIC microcontroller, with native USB support and compatibility with the Arduino programming language plus an IDE built with Python and sdcc as compiler.
Unduino[250] PIC A board based on the dsPIC33FJ128MC202 microcontroller, with integrated motor control peripherals.
Netduino N2[251] Wilderness Labs[251] Yes Cortex M3 (ARMv7-M) 120 MHz Arduino 69mm x 53mm USB 5V - 9V DC 192 Kb 60 Kb 16 6 6 1/15/2013 120 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[251]
Netduino N2 Plus[251] Wilderness Labs[251] Yes Cortex M4 ARMv7E-M 168 MHz Arduino 69mm x 53mm USB 5V - 9V DC 384 Kb 100 Kb 16 6 6 11/8/2012 168 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[251]
Netduino N3[251] Wilderness Labs[251] Yes Cortex-M4 (STM32F4) ARMv7E-M 168 MHz Arduino 69mm x 53mm USB 5V - 12V DC 384 Kb 164 Kb 16 6 6 168 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[251]
Netduino N3 Ethernet[251] Wilderness Labs[251] Yes Cortex-M4 (STM32F4) ARMv7E-M 168 MHz Arduino 69mm x 53mm USB 5V - 12V DC 1408 Kb 164 Kb 16 6 6 168 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[251]
Netduino N3 WiFi[251] Wilderness Labs[251] Yes Cortex-M4 (STM32F4) ARMv7E-M 168 MHz Arduino 69mm x 53mm USB 5V - 12V DC 1408 Kb 164 Kb 16 6 6 168 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[251]
Vinculo[252] Vinculum II FTDI USB development board for the FTDI Vinculum II microcontroller.
FEZ Domino,[253] FEZ Panda,[254] and FEZ Panda II[255] ARM 72 MHz 72 MHz 32-bit ARM (GHI Electronics USBizi chips) micro-controller boards with support for the .NET Micro Framework. Pin compatible with Arduino shields, although drivers are required for some shields.[256]
TheUno[257] MyFreescaleWebPage[257] Freescale S08DZ60
Freescale 8-bit S08DZ60 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse. Integrated open-source debugging cable for fast prototyping.
BigBrother[257] MyFreescaleWebPage[257] Freescale MCF51AC256
Freescale 32-bit Coldfire MCF51AC256 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse and in C++ with CodeSourcery. Integrated open-source debugging cable for fast prototyping. The first Arduino Shield Compatible board with two Arduino slots to add more and more shields.
BigBrother-USB[257] MyFreescaleWebPage[257] Freescale MCF51JM128
Freescale 32-bit Coldfire MCF51JM128 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse and in C++ with CodeSourcery. Integrated open-source debugging cable for fast prototyping. The first Arduino Shield Compatible board with two Arduino slots to add more and more shields.
Firebird32[258] Coldfire Freescale 32-bit Coldfire MCF51JM128 based Arduino Shield Compatible development board. Programmable in StickOS BASIC, and C or assembly language using Flexisframework or CodeWarrior with a step-by-step debugger. The Firebird32 is also available in a special model based on the 8-bit MC9S08JM60.
Stampduino[259] Parallax PIC or Parallax SX Arduino Shield compatible BASIC Stamp 2 board, interfaces with most standard Arduino shields. The BS comes with a free IDE.
STM32 Nucleo[260] STMicroelectronics STM32 Family Arduino connectors and ST Morpho headers
SunDuinoPIC[102] PIC18F2550 or PIC18F4550 Microchip PIC Arduino hardware compatible board. Based PINGUINO Project. USB HID Bootloader.
Breeze[261][262] PIC Breeze boards are prototyping platforms for 28-pin PIC microcontrollers. They come with a PIC18F25K22 (USB-UART interface) or PIC18F25J50 (direct USB interface), however almost any 28-pin PIC can be used with the platform.
VM2 Micro-Robotics Ltd No STM32F103 72 MHz VM2 52 mm x 48 mm Serial interface 3.3 V 512 kB + 8 MB 1024 + 64 65 8 19 2 2010 VM2 is a family of single board microcontrollers intended for use in Automation, Instrumentation, Hand Held Devices and Process Control.

Programming environment: Venom2 Archived 2017-11-15 at the Wayback Machine language,VenomIDE Archived 2017-11-15 at the Wayback Machine development system, Visual Designer.

I/O:

  • 5 Serial Ports
  • 2 I2C busses
  • USB port
  • CAN Bus
  • 2 SPI Busses
  • 8 Pulse I/0 Channels
  • 3 Quadrature shaft encoders
  • 19 Analogue inputs (12-bit)
  • 2 Analogue outputs (12-bit)
  • 65+ Digital I/0
  • External bus for display devices, etc.
ISP4520 Board Cyrola Inc. No ISP4520-AS 64 MHz minimal 1.7 in x 0.6 in UART, I2C(TWI) 1.8-3.6 V 512 KB 64 KB 9 3
Simplified ISP4520 breakout board. Minimum GPIO ports. No NFC Antenna connection ports. External EEPROM with EUI-64 Node ID option ready.

See also

[edit]

Comparison of single-board computers

References

[edit]
  1. ^ "Arduino 101 | Arduino Documentation".
  2. ^ "Intel Curie Module: Unleashing Wearable Device Innovation". intel.com. Retrieved 15 August 2015.
  3. ^ "Zero | Arduino Documentation".
  4. ^ "ATSAMD21G18;". Atmel.com. Retrieved 12 August 2014.
  5. ^ "Arduino Zero now available for purchase!". 15 June 2015.
  6. ^ "Meet Arduino ZERO - the new board jointly developed by Arduino and Atmel". 15 May 2014.
  7. ^ "20 Arduino ZERO Dev. Edition available for beta-testing - Join us!". August 2014.
  8. ^ "ArduinoBoardDue". Arduino.cc. Retrieved 18 January 2013.
  9. ^ Chirgwin, Richard (20 September 2011). "Arduino to add ARM board this year". The Register. Retrieved 20 September 2011.
  10. ^ a b c "AT91SAM3X8E;". Atmel.com. Retrieved 18 January 2013.
  11. ^ a b c "ATmega16U2". Atmel.com. Retrieved 18 January 2013.
  12. ^ "SAM3U4E". Atmel.com. Retrieved 18 January 2013.
  13. ^ "atmel.com". atmel.com. Retrieved 18 January 2013.
  14. ^ "Arduino Blog- Arduino Due is finally here". Arduino.cc. 22 October 2012. Retrieved 18 January 2013.
  15. ^ "Arduino Yún | Arduino Documentation". docs.arduino.cc. Retrieved 11 January 2024.
  16. ^ a b c d e f "ATmega32U4". Atmel.com. Retrieved 18 January 2013.
  17. ^ "Updating about Arduino Yún (Video preview!) and Arduino Robot". 21 August 2013.
  18. ^ "Arduino - ArduinoBoardLeonardo". Arduino.cc. Retrieved 23 January 2013.
  19. ^ "Arduino Blog- Massimo Introduces Arduino Leonardo". Arduino.cc. 23 July 2012. Retrieved 18 January 2013.
  20. ^ "Arduino - ArduinoBoardUno". Arduino.cc. Retrieved 23 January 2013.
  21. ^ a b "ATmega328P". Atmel.com. Retrieved 18 January 2013.
  22. ^ a b c "ATmega8U2". Atmel.com. Retrieved 18 January 2013.
  23. ^ a b "Arduino Blog- Dinner is Ready". Arduino.cc. 24 September 2010. Retrieved 18 January 2013.
  24. ^ "Arduino - ArduinoBoardMega2560". Arduino.cc. Retrieved 23 January 2013.
  25. ^ a b c d e f g h i "ATmega2560". Atmel.com. Retrieved 18 January 2013.
  26. ^ "ArduinoBoardEthernet". Arduino.cc. Retrieved 18 January 2013.
  27. ^ a b c "ATmega328". Atmel.com. Retrieved 18 January 2013.
  28. ^ a b "Arduino Blog- Arduino Ethernet, ADK Available for purchase". Arduino.cc. 13 July 2011. Retrieved 18 January 2013.
  29. ^ "Arduino - ArduinoEthernetShield". Arduino.cc. Retrieved 23 January 2013.
  30. ^ a b "Arduino - ArduinoBoardFio". Arduino.cc. Retrieved 23 January 2013.
  31. ^ "Arduino Blog- Arduino FIO presented at Uno Punto Zero". Arduino.cc. 18 March 2010. Retrieved 18 January 2013.
  32. ^ "ArduinoBoardNano". Arduino.cc. Retrieved 18 January 2013.
  33. ^ a b c d e f g h i "ATmega168". Atmel.com. Retrieved 18 January 2013.
  34. ^ "FT232R". ftdichip.com. Retrieved 14 August 2014.
  35. ^ "Arduino Blog- Arduino Nano: all-in-one design for breadboard use". Arduino.cc. 15 May 2008. Retrieved 18 January 2013.
  36. ^ "ArduinoBoardLilyPad". Arduino.cc. Retrieved 18 January 2013.
  37. ^ "Arduino Blog- LilyPad Arduino and Arduino 0010". Arduino.cc. 17 October 2007. Retrieved 18 January 2013.
  38. ^ a b "Arduino Pro | Arduino Documentation". docs.arduino.cc. Retrieved 11 January 2024.
  39. ^ "ArduinoBoardADK". Arduino.cc. Retrieved 18 January 2013.
  40. ^ "ArduinoBoardEsplora". Arduino.cc. Retrieved 18 January 2013.
  41. ^ "ArduinoBoardMicro". Arduino.cc. Retrieved 18 January 2013.
  42. ^ "Arduino Blog- New Arduino Micro available". Arduino.cc. 8 November 2012. Retrieved 18 January 2013.
  43. ^ "Arduino - ArduinoBoardSerial". Arduino.cc. Retrieved 23 January 2013.
  44. ^ a b c d "ATmega8". Atmel.com. Retrieved 14 August 2014.
  45. ^ a b c d "Arduino - Boards". Arduino.cc. 1 March 2009. Retrieved 23 January 2013.
  46. ^ a b "Arduino - ArduinoBoardBluetooth". Arduino.cc. Retrieved 23 January 2013.
  47. ^ a b "Arduino Blog- Arduino Diecimila and BT reference designs now available". Arduino.cc. 22 October 2007. Retrieved 18 January 2013.
  48. ^ "ArduinoBoardDiecimila". Arduino.cc. Retrieved 18 January 2013.
  49. ^ "Arduino - ArduinoBoardDuemilanove". Arduino.cc. Retrieved 23 January 2013.
  50. ^ "Arduino Blog- Arduino Duemilanove". Arduino.cc. 19 October 2008. Retrieved 18 January 2013.
  51. ^ "Arduino - ArduinoBoardMega". Arduino.cc. Retrieved 23 January 2013.
  52. ^ a b "ATmega1280". Atmel.com. Retrieved 18 January 2013.
  53. ^ "Arduino Blog- Arduino Mega: bigger, more powerful, still blue". Arduino.cc. 26 March 2009. Retrieved 18 January 2013.
  54. ^ "Arduino - ArduinoBoardMega". Arduino.cc. Retrieved 23 January 2013.
  55. ^ "ArduinoBoardProMini". Arduino.cc. Retrieved 18 January 2013.
  56. ^ "Arduino Blog- Arduino Pro and Pro Mini". Arduino.cc. 23 August 2008. Retrieved 18 January 2013.
  57. ^ "Canaduino Uno Bone "FULL" - Arduino Uno R3 compatible Atmega328P-PU – Universal-Solder". Archived from the original on 20 December 2016. Retrieved 7 May 2017.
  58. ^ "ST Freeduino Robotics Board - Home". Archived from the original on 3 December 2016. Retrieved 7 May 2017.
  59. ^ "GSTduino – Arduino Compatible Special Purpose Board". www.greensystemtech.com. Retrieved 26 October 2016.
  60. ^ "Linduino | Design Center | Analog Devices".
  61. ^ "Arduino UNO Compatible Board - InVentor UNO : Ventor Technologies".
  62. ^ "Homepage". Ventor Technologies. Retrieved 11 January 2024.
  63. ^ "Page Redirection". Archived from the original on 16 November 2016. Retrieved 7 May 2017.
  64. ^ "SainSmart UNO". sainsmart.com. Archived from the original on 14 December 2012. Retrieved 23 January 2013.
  65. ^ a b c "SainSmart-Open Hardware Company". sainsmart.com. Retrieved 23 January 2013.
  66. ^ "SainSmart Mega 2560". sainsmart.com. Archived from the original on 14 December 2012. Retrieved 23 January 2013.
  67. ^ "Archived copy" (PDF). Archived from the original (PDF) on 2 April 2015. Retrieved 7 May 2017.{{cite web}}: CS1 maint: archived copy as title (link)
  68. ^ "micro:bit Accessories Store | ELECFREAKS". www.elecfreaks.com. Retrieved 11 January 2024.
  69. ^ "SainSmart UNO R3". sainsmart.com. Retrieved 23 January 2013.
  70. ^ Tavir-AVR. "Tavir-AVR :: Bascom, Arduino, Wiring - Programozás, Fórum, ingyenes mintaalkalmazások, könyvek". Avr.tavir.hu. Archived from the original on 8 March 2013. Retrieved 23 January 2013.
  71. ^ "TavIR : Mikrokontroller világ | A gyakorlati tudás tárháza" (in Hungarian). Tavir.hu. Retrieved 23 January 2013.
  72. ^ "Brasuíno". Brasuino.holoscopio.com. Archived from the original on 11 July 2011. Retrieved 23 January 2013.
  73. ^ "Holoscópio". Holoscopio.com. 18 July 2011. Archived from the original on 25 February 2009. Retrieved 23 January 2013.
  74. ^ a b "Chibiduino2". tiisai.dip.jp. Archived from the original on 12 October 2013. Retrieved 17 August 2013.
  75. ^ "Arduino совместимая платформа "Cosmo Black Star" :: платы Arduino". Jt5.ru. Archived from the original on 16 January 2013. Retrieved 23 January 2013.
  76. ^ a b "JT5 :: инжиниринговая компания специализирующая на разработке и производстве электронных устройств". Jt5.ru. Retrieved 23 January 2013.
  77. ^ "CraftDuino / RoboCraft.ru / RoboCraft". Robocraft.ru. 20 October 2009. Retrieved 23 January 2013.
  78. ^ "Evil Mad Scientist Laboratories | Making the world a better place, one Evil Mad Scientist at a time". 14 December 2023. Archived from the original on 11 May 2012.
  79. ^ "Electronics | multiplo Robot Building System". Multiplo.org. Archived from the original on 14 December 2012. Retrieved 23 January 2013.
  80. ^ "multiplo Robot Building System |". Multiplo.org. Retrieved 23 January 2013.
  81. ^ "アーデュイーノ互換マイコン・ボードを作る". Shop.cqpub.co.jp. Retrieved 23 January 2013.
  82. ^ "Platino - Versatile Board for AVR Microcontrollers [100892 & 150555] | Elektor Labs". www.elektor-labs.com. Retrieved 4 November 2015.
  83. ^ a b "MaxSerial : Fundamental Logic WebStore, Electronic Kits and Components". Store.fundamentallogic.com. 30 May 2010. Retrieved 23 January 2013.
  84. ^ "fayalab inc. | fayalab inc". www.fayalab.com. Retrieved 18 February 2016.
  85. ^ "SB-Freeduino". Solarbotics. Archived from the original on 15 February 2012. Retrieved 23 January 2013.
  86. ^ "Solarbotics". Solarbotics. Retrieved 23 January 2013.
  87. ^ "Freeduino USB complete KIT (Arduino Duemilanove Compatible)". Nkcelectronics.com. Archived from the original on 28 January 2013. Retrieved 23 January 2013.
  88. ^ "Illuminato::Genesis". Liquidware. Archived from the original on 18 January 2013. Retrieved 23 January 2013.
  89. ^ "InduinoX". Induino Wiki. Retrieved 13 August 2011.[dead link]
  90. ^ "Simple Labs | Simplifying Technology". Build.simplelabs.co.in. Archived from the original on 30 March 2012. Retrieved 23 January 2013.
  91. ^ "Vol.27 テクノ工作セット(8ビットマイコン+光残像キット) | 大人の科学マガジン | 大人の科学.net". Otonanokagaku.net. Retrieved 23 January 2013.
  92. ^ "990.110". Droids.it. Archived from the original on 12 January 2015. Retrieved 23 January 2013.
  93. ^ "990.023 Luigino328 - User Manual [EN]". Droids.it. Archived from the original on 5 June 2013. Retrieved 23 January 2013.
  94. ^ "Metaboard – Metalab" (in German). Metalab.at. Retrieved 23 January 2013.
  95. ^ "small computers for art and science". Rascal Micro. Retrieved 23 January 2013.
  96. ^ "Raspduino". BitWizard WIKI. Archived from the original on 31 March 2013. Retrieved 23 January 2013.
  97. ^ "BitWizard". Bitwizard.nl. Retrieved 23 January 2013.
  98. ^ "DFRduino Romeo-All in one Controller V1.1(SKU:DFR0004) - Robot Wiki". Dfrobot.com. Retrieved 23 January 2013.
  99. ^ "DFRobot-An Online Opensource Robot and Hardware Shop". Dfrobot.com. Retrieved 23 January 2013.
  100. ^ "Tools, Parts, Kits for DIY'ers". Curious Inventor. Archived from the original on 12 March 2010. Retrieved 23 January 2013.
  101. ^ "Seeeduino V3.0 (ATmega328P) [ARD130D2P] - $22.50 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Archived from the original on 9 November 2014. Retrieved 9 November 2014.
  102. ^ a b c "SunDUINO Nowy wymiar elektroniki". Sunduino.pl. Retrieved 23 January 2013.
  103. ^ TwentyTen (100% Arduino Compatible). "Parts & Kits for Arduino Online, Buy Microcontroller Boards, Electronic Components for Arduino - TwentyTen (100% Arduino Compatible)". Freetronics. Retrieved 23 January 2013.{{cite web}}: CS1 maint: numeric names: authors list (link)
  104. ^ "Parts & Kits for Arduino Online, Buy Microcontroller Boards, Electronic Components for Arduino - Welcome". Freetronics. Retrieved 23 January 2013.
  105. ^ "Volksduino: complete low-cost Arduino clone". Appliedplatonics.com. Retrieved 23 January 2013.
  106. ^ a b "Applied Platonics". Applied Platonics. Retrieved 23 January 2013.
  107. ^ "Wise time with Arduino". Timewitharduino.blogspot.com. Retrieved 23 January 2013.
  108. ^ a b "YourDuino". YourDuino. Retrieved 23 January 2013.
  109. ^ "YourDuinoRobo1 (Upgraded Arduino Compatible)". Arduino-direct.com. Retrieved 23 September 2014.
  110. ^ "geekstudio.co.za". Archived from the original on 7 November 2010. Retrieved 7 May 2017.
  111. ^ "Zigduino r1 - Logos Electromechanical". Logos-electro.com. Archived from the original on 31 January 2013. Retrieved 23 January 2013.
  112. ^ "Products & Services - Logos Electromechanical". Logos-electro.com. 22 February 1999. Archived from the original on 16 January 2013. Retrieved 23 January 2013.
  113. ^ "EtherTen Arduino compatible with onboard Ethernet".
  114. ^ "EtherMega (100% Arduino Mega 2560 compatible with onboard Ethernet)".
  115. ^ "USBDroid (Arduino Uno compatible with onboard Android/USB Host)".
  116. ^ "Eleven (100% Arduino Uno Compatible)".
  117. ^ "KitTen (Arduino-compatible kit)".
  118. ^ CATkit
  119. ^ "EtherDue (100% Arduino Due compatible with onboard Ethernet)".
  120. ^ "TAIJIUINO Due Pro -- Compatible with Arduino Due [ARD_BD_PRP] - $43.90 : Elechouse, Arduino Play House". Archived from the original on 23 December 2014. Retrieved 7 May 2017.
  121. ^ http://www.hitex.co.uk/index.php?id=3650 [dead link]
  122. ^ "Io:duino". Railstars. Archived from the original on 2 February 2013. Retrieved 23 January 2013.
  123. ^ "DFRobotShop Rover V2 - Arduino Compatible Tracked Robot (Basic Kit)". RobotShop. Archived from the original on 25 January 2013. Retrieved 23 January 2013.
  124. ^ "Mindsets online". Mindsets online. 1 March 2007. Archived from the original on 21 March 2013. Retrieved 23 January 2013.
  125. ^ "Mindsets online.co.uk". Mindsets online.co.uk. 1 March 2007. Archived from the original on 16 January 2013. Retrieved 23 January 2013.
  126. ^ "mindsetsonline.co.uk" (PDF). Archived from the original (PDF) on 21 March 2012.
  127. ^ "Bump and Reverse Robot Kit (Faraduino) - Faraduino". Mindsets online. 1 March 2007. Archived from the original on 20 March 2013. Retrieved 23 January 2013.
  128. ^ "Faraconnect Shield (Faraduino) - Faraduino". Mindsets online. 1 March 2007. Archived from the original on 20 March 2013. Retrieved 23 January 2013.
  129. ^ "Motoruino | GUIBOT". Guibot.pt. Archived from the original on 5 January 2013. Retrieved 23 January 2013.
  130. ^ "Arduino based Alternator Regulator". arduinoalternatorregulator.blogspot.com. Retrieved 5 April 2017.
  131. ^ a b Anderson, Chris (21 January 2009). "ArduPilot (Legacy) main page". DIY Drones. Retrieved 23 January 2013.
  132. ^ "Flyduino Shop - Multirotor, Multicopter Teile & Zubehör für Quadrocopter, Hexacopter, Octocopter - Motore, Rahmen, FCs & ESCs". Flyduino.net. Archived from the original on 11 January 2013. Retrieved 23 January 2013.
  133. ^ "Arduino совместимая платформа "Колибри" с RF радиомодулем 868 Mhz :: платы Arduino". Jt5.ru. 30 March 2012. Archived from the original on 1 January 2013. Retrieved 23 January 2013.
  134. ^ "JeeNode - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Retrieved 23 January 2013.
  135. ^ "ArduPhone Arduino Compatible Cellphone".
  136. ^ "WTF Duino". Archived from the original on 13 December 2015. Retrieved 8 July 2019.
  137. ^ "tah.io - Domain Name For Sale". Dan.com. Retrieved 11 January 2024.
  138. ^ Ltd, Revealing Hour Creations Pvt. "Revealing Hour Creations". revealinghour.github.io. Retrieved 11 January 2024.
  139. ^ a b c "Controllino". Retrieved 19 July 2016.
  140. ^ a b "FA-DUINO-12RA (INDUSTRIAL ARDUINO)". Retrieved 19 July 2016.
  141. ^ "ARDBOX". Retrieved 19 July 2016.
  142. ^ "Industruino". Retrieved 12 June 2015.
  143. ^ Facchetti, Gabriele. "Iono". Retrieved 11 January 2024.
  144. ^ "Ardweeny". Solarbotics. Archived from the original on 15 February 2012. Retrieved 23 January 2013.
  145. ^ "Banguino". Dimitech. Retrieved 14 June 2014.
  146. ^ "Bare Bones Board (BBB) Kit | Modern Device". Shop.moderndevice.com. Archived from the original on 13 March 2013. Retrieved 23 January 2013.
  147. ^ "RBBB Kit | Modern Device". Shop.moderndevice.com. Archived from the original on 9 March 2013. Retrieved 23 January 2013.
  148. ^ "аналог Arduino, но другой. ;)". Blockduino. Retrieved 23 January 2013.
  149. ^ "Каталог блоков от BlockDuino". Blockduino.org. Retrieved 23 January 2013.
  150. ^ "Boarduino - Breadboard-compatible Arduino Clone". Ladyada.net. 15 August 2011. Retrieved 23 January 2013.
  151. ^ "Breaduino: the all-breadboard Arduino clone". Appliedplatonics.com. Retrieved 23 January 2013.
  152. ^ "Croduino Basic 5x3cm Arduino Duemilanove compatible board". e-radionica.com. Retrieved 15 January 2016.
  153. ^ "chip45.com". Retrieved 11 January 2024.
  154. ^ "chip45.com". Retrieved 11 January 2024.
  155. ^ a b "Microcontroller Modules, Boards, Tools and Accessories for Atmel AVR ATmega Xmega Processors". Chip45.com. Retrieved 23 January 2013.
  156. ^ "Electronics for Hobbyists". Circuit Monkey. Archived from the original on 30 March 2012. Retrieved 23 January 2013.
  157. ^ "Digispark USB Development Board". Retrieved 5 June 2014.
  158. ^ "Digistump". Retrieved 5 June 2014.
  159. ^ "DragonFly - ATmega1280 Arduino Bundle - Circuit Monkey". Circuitmonkey.com. Archived from the original on 4 November 2014. Retrieved 4 November 2014.
  160. ^ a b "iDuino Complete Kit [iDuino-3-kit] - $21.00 : Fundamental Logic WebStore, Electronic Kits and Components". Spiffie.org. 30 May 2010. Archived from the original on 9 December 2012. Retrieved 23 January 2013.
  161. ^ a b Albino, Alejandro (21 April 2012). "Smallest Arduino". Femtoduino. Retrieved 23 January 2013.
  162. ^ "freeduino lite v2". Bhashatech.com. Archived from the original on 2 November 2012. Retrieved 23 January 2013.
  163. ^ a b c d "Bhasha Technologies". Bhashatech.com. Archived from the original on 18 January 2013. Retrieved 23 January 2013.
  164. ^ "Freeduino Serial india". Bhashatech.com. 23 August 2009. Archived from the original on 15 January 2012. Retrieved 23 January 2013.
  165. ^ "Femtoduino: an ultrasmall (20.7x15.2 mm) libre Arduino compatible board". Varesano.net. Retrieved 23 January 2013.
  166. ^ http://www.femtoduino.com/spex/imuduino-btle , specifications
  167. ^ http://www.femtoduino.com Archived 2014-11-07 at the Wayback Machine , Femtoduino.com website
  168. ^ "JN - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Archived from the original on 15 June 2012. Retrieved 23 January 2013.
  169. ^ Computing stuff tied to the physical world (19 January 2013). "JeeLabs". JeeLabs. Retrieved 23 January 2013.
  170. ^ "Wiki - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Retrieved 23 January 2013.
  171. ^ http://www.geppettoelectronics.com/search/label/LCDuino , LCDuino blog
  172. ^ "Silicon Railway. Small, powerful, and versatile at a reasonable cost". Siliconrailway.com. Retrieved 23 January 2013.
  173. ^ lowpowerlab.com, All about Moteino
  174. ^ "LowPowerLab | Low Power IoT Systems". 15 December 2021. Retrieved 11 January 2024.
  175. ^ https://github.com/LowPowerLab/DualOptiboot DualOptiboot
  176. ^ "NavSpark Community". Retrieved 5 June 2014.
  177. ^ "SkyTraq". Retrieved 5 June 2014.
  178. ^ "Wiblocks - NB1A - ATmega328 + DAC + RTC". Wiblocks.luciani.org. Retrieved 23 January 2013.
  179. ^ "Wiblocks - NB2 System". Wiblocks.luciani.org. Retrieved 23 January 2013.
  180. ^ "Electronics for Hobbyists". Circuit Monkey. Archived from the original on 30 March 2012. Retrieved 23 January 2013.
  181. ^ "om328p". Oak Micros. Archived from the original on 23 October 2012. Retrieved 23 January 2013.
  182. ^ "OpenTag Board". Loggerhead Instruments. Archived from the original on 9 November 2014. Retrieved 9 November 2014.
  183. ^ "Guilherme Martins : PAPERduino's design". Lab.guilhermemartins.net. 6 May 2009. Retrieved 23 January 2013.
  184. ^ "Particle Store". Particle. Retrieved 28 September 2015.
  185. ^ "STM32F2x5". st.com. Retrieved 28 September 2015.
  186. ^ "Picoduino". Peter Misenko. Retrieved 4 June 2014.
  187. ^ "Pro Micro - 5V/16MHz - DEV-12640 - SparkFun Electronics".
  188. ^ "Rainbowduino LED driver platform - ATmega328 Rainbowduino LED driver platform - Plug and Shine! [ARD127D2P] - $24.90 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Archived from the original on 6 January 2013. Retrieved 23 January 2013.
  189. ^ "What Is Sanguino?". Sanguino.cc. Retrieved 23 January 2013.
  190. ^ "Seeeduino Mega [ARD121D2P] - $43.00 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Archived from the original on 13 June 2013. Retrieved 23 January 2013.
  191. ^ "Sippino". SpikenzieLabs. 2011. Archived from the original on 15 August 2014. Retrieved 9 November 2014.
  192. ^ "SODAQ board". www.sodaq.net. Retrieved 2 October 2013.
  193. ^ "Sparrow prototyping board". open-homeautomation.com. Archived from the original on 17 September 2013. Retrieved 13 May 2013.
  194. ^ "Red Back Spider robot controller | Let's Make Robots!". Letsmakerobots.com. Archived from the original on 2 February 2013. Retrieved 23 January 2013.
  195. ^ "StickDuino - USB Stick Sized Arduino Clone". Spiffie.org. Archived from the original on 13 January 2013. Retrieved 23 January 2013.
  196. ^ https://www.pjrc.com/store/teensy.html PJRC Teensy 2.0
  197. ^ a b c d https://www.pjrc.com/teensy PJRC teensy variants
  198. ^ https://www.pjrc.com/store/teensypp.html PJRC Teensy 2.0++
  199. ^ https://www.pjrc.com/store/teensy3.html , PRJC Teensy 3.0
  200. ^ https://www.pjrc.com/teensy/teensy31.html PJRC Teensy 3.1/3.2
  201. ^ a b "Teensy LC (Low Cost)". www.pjrc.com. Retrieved 11 January 2024.
  202. ^ "TinyDuino". TinyCircuits. Archived from the original on 7 December 2013. Retrieved 23 January 2013.
  203. ^ a b "A Maker of Tiny Open Source Circuits". TinyCircuits. Retrieved 23 January 2013.
  204. ^ "TinyLily". TinyCircuits. Archived from the original on 22 January 2013. Retrieved 23 January 2013.
  205. ^ "Introducing Trinket".
  206. ^ "strobit - Strobit Wireless Widget Open Hardware Project - Google Project Hosting". Retrieved 23 January 2013.
  207. ^ "Product: Talk2 Whisper Node – AVR". Talk2 by Wisen. 3 February 2016. Archived from the original on 20 December 2016. Retrieved 14 December 2016.
  208. ^ "Wiblocks - ZB1 System". Wiblocks.luciani.org. Retrieved 23 January 2013.
  209. ^ OpenEnergyMonitor. "emonTx". OpenEnergyMonitor. Retrieved 23 January 2013.
  210. ^ "Project:Nanode - London Hackspace". Wiki.london.hackspace.org.uk. Retrieved 23 January 2013.
  211. ^ a b c "Wireless Arduino-compatible miniatures". panStamp. Archived from the original on 31 January 2013. Retrieved 23 January 2013.
  212. ^ "Lagarto: open automation platform". panstamp. Archived from the original on 18 December 2013. Retrieved 17 March 2015.
  213. ^ "Microduino Wiki(English)". www.microduino.net. Archived from the original on 12 January 2015. Retrieved 10 October 2013.
  214. ^ "Microduino Wiki(中文)". www.microduino.net. Archived from the original on 13 November 2013. Retrieved 10 October 2013.
  215. ^ "Virtuabotix is under construction". www.virtuabotix.com. Retrieved 11 January 2024.
  216. ^ "LeoStick (Arduino Compatible)".
  217. ^ "Wattuino". GitHub. 3 March 2022.
  218. ^ "Wattuino". GitHub. 3 March 2022.
  219. ^ "Wattuino". GitHub. 3 March 2022.
  220. ^ "leaflabs.com". leaflabs.com. Retrieved 23 January 2013.
  221. ^ "leaflabs.com". leaflabs.com. Retrieved 23 January 2013.
  222. ^ st.com
  223. ^ "leaflabs/maple-ide · GitHub". Github.com. Retrieved 23 January 2013.
  224. ^ "Arduino - Reference". Arduino.cc. Retrieved 23 January 2013.
  225. ^ "leaflabs/libmaple · GitHub". Github.com. Retrieved 23 January 2013.
  226. ^ "Arduino STM32". GitHub. 17 May 2022.
  227. ^ a b "Digital Design Engineer's Source". Digilent Inc. Retrieved 23 January 2013.
  228. ^ a b "chipKIT32/chipKIT32-MAX · GitHub". Github.com. Retrieved 23 January 2013.
  229. ^ a b "Digital Design Engineer's Source". Digilent Inc. Archived from the original on 4 May 2013. Retrieved 23 January 2013.
  230. ^ a b "Digital Design Engineer's Source". Digilent Inc. Archived from the original on 26 November 2012. Retrieved 23 January 2013.
  231. ^ a b "chipKIT Uno32: first impressions and benchmarks". Hackaday.com. 27 May 2011. Retrieved 23 January 2013.
  232. ^ "Freescale Freedom Development Platform for Kinetis KL14, KL15, KL24, KL25 MCUs". Archived from the original on 6 October 2014.
  233. ^ "Welcome to Freescale - Freescale Semiconductor". Freescale.com. Retrieved 23 January 2013.
  234. ^ "KL2 Product Summary Page". Freescale.com. Retrieved 23 January 2013.
  235. ^ "Coridium". Coridium.us. Retrieved 23 January 2013.
  236. ^ "Coridium". Coridium.us. Retrieved 23 January 2013.
  237. ^ "Use Arduino code on a TI Launchpad MSP430". Instructables. 14 August 2012.
  238. ^ "Energia". Github. 20 December 2021.
  239. ^ "Sakura board homepage". Gadget Renesas project. Retrieved 28 October 2013.
  240. ^ "Feature description of board and web compiler". Renesas. Archived from the original on 25 June 2013. Retrieved 28 October 2013.
  241. ^ "SiFive - HiFive1". Archived from the original on 26 February 2017. Retrieved 7 May 2017.
  242. ^ "CHIPINO - The Microchip PIC Based Arduino Style Module". Chipino.com. Retrieved 15 November 2014.
  243. ^ "CHIPINO". Howtronics.com. Howtronics. Archived from the original on 29 November 2014. Retrieved 15 November 2014.
  244. ^ "CHIPINO-FAQ". Chipino.com. Retrieved 15 November 2014.
  245. ^ "propellerpowered.com". Archived from the original on 25 August 2011. Retrieved 7 May 2017.
  246. ^ "QuickStart 1: Comparison of Programming Tools". Parallax Semiconductor. Archived from the original on 22 May 2013. Retrieved 23 January 2013.
  247. ^ Mitchell, Graham (9 June 2010). "Introducing The Amicus18 [195] | Amicus18 Beginner Guides | Amicus18". Digital-diy.com. Retrieved 23 January 2013.
  248. ^ "Bugblat Cortino". Bugblat.com. 4 January 2012. Retrieved 23 January 2013.
  249. ^ "PINGUINO Project". Hackinglab.org. 26 August 2010. Archived from the original on 18 May 2013. Retrieved 23 January 2013.
  250. ^ "unduino.com". Archived from the original on 28 October 2012. Retrieved 7 May 2017.
  251. ^ a b c d e f g h i j k l m n o "Overview". Netduino. Archived from the original on 20 January 2013. Retrieved 23 January 2013.
  252. ^ "Development Modules". Ftdichip.com. Retrieved 23 January 2013.
  253. ^ "FEZ Domino". GHI Electronics. Archived from the original on 30 November 2012. Retrieved 23 January 2013.
  254. ^ "FEZ Panda". GHI Electronics. Archived from the original on 24 October 2012. Retrieved 23 January 2013.
  255. ^ FEZ Cerbuino Bee. "FEZ Panda II". GHI Electronics. Archived from the original on 15 January 2013. Retrieved 23 January 2013.
  256. ^ "Comparison". TinyCLR.com. Archived from the original on 11 March 2011. Retrieved 13 August 2011.
  257. ^ a b c d e f "MyFreescaleWebPage". MyFreescaleWebPage. Retrieved 23 January 2013.
  258. ^ "Firebird32 - My firrst 32 bit duino". www.firebird32.com. Retrieved 11 January 2024.
  259. ^ "parallax.com". Archived from the original on 12 November 2012.
  260. ^ "STM32 Nucleo Boards - STMicroelectronics".
  261. ^ Breeze Boards Dizzy Enterprises website
  262. ^ Arduino clone with mikroBUS socket mikroElektronika news article

Further reading

[edit]
[edit]