Jump to content

Rensselaer RP-1

From Wikipedia, the free encyclopedia

RP-1
Role Glider
National origin United States
Manufacturer Rensselaer Polytechnic Institute
First flight 1980
Status Project completed
Number built one

The Rensselaer RP-1 (for Rensselaer Polytechnic design 1) is an American low-wing, single-seat, foot-launchable[how?] prototype glider that was designed and built by the Rensselaer Polytechnic Institute of Troy, New York.[1] It first flew in 1980.[2]

Design and development

[edit]

The RP-1 was partly funded by NASA and was the first aircraft in Rensselaer's Composite Aircraft Program.[1]

The aircraft is of mixed construction, made from composites, Kevlar and PVC foam. Its 37.5 ft (11.4 m) span wing employs a Wortmann FX-63-137 airfoil. The aircraft weighs just 116 lb (53 kg) and was intended to be foot-launched.[how?] The landing gear consists of a main skid and dual tail skids. The aircraft achieved a 20:1 glide ratio. Only one was completed; it has been preserved at the Empire State Aerosciences Museum in Schenectady, New York.[1][3]

Specifications (RP-1)

[edit]

Data from Sailplane Directory[1]

General characteristics

  • Crew: one
  • Wingspan: 37 ft 6 in (11.43 m)
  • Wing area: 129 sq ft (12.0 m2)
  • Aspect ratio: 11:1
  • Airfoil: Wortmann FX-63-137
  • Empty weight: 116 lb (53 kg)
  • Gross weight: 265 lb (120 kg)

Performance

  • Maximum glide ratio: 20:1 at 33 mph (53 km/h)
  • Rate of sink: 120 ft/min (0.61 m/s)
  • Wing loading: 2.05 lb/sq ft (10.0 kg/m2)

See also

[edit]

Aircraft of comparable role, configuration, and era

Related lists

References

[edit]
  1. ^ a b c d Activate Media (2006). "RP-1 Rensselaer". Archived from the original on September 2, 2012. Retrieved August 23, 2011.
  2. ^ "J2mcL Planeurs - Fiche planeur n°". www.j2mcl-planeurs.net. Retrieved May 21, 2022.
  3. ^ Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved August 1, 2011.