This article provides insufficient context for those unfamiliar with the subject.(October 2009) |
This article needs additional citations for verification. (April 2007) |
Body plethysmography or "Body Box" for short, is a very sensitive lung measurement used to detect lung pathology that might be missed with conventional pulmonary function tests. This method of obtaining the absolute volume of air within one's lungs may also be used in situations where several repeated trials are required or where the patient is unable to perform the multibreath tests. The technique requires moderately complex coaching and instruction for the subject. In the USA, such tests are usually performed by Certified or Registered Pulmonary Function Technologists (CPFT or RPFT) who are credentialed by the National Board for Respiratory Care NBRC [1].
Body plethysmography | |
---|---|
A whole body plethysmography. A person is entirely enclosed within the body box space, the door sealed, pressure equilibrated, and measurements taken. With high visibility and intercom communication with the pulmonary function technologist, the subject has less risk of fearing the test. | |
MeSH | D010993 |
OPS-301 code | 1-710 |
More specifically, the test is done by enclosing the subject in an airtight chamber often referred to as a body box; a pneumotachometer is used to measure airflow while a mouth pressure transducer with a shutter measures the alveolar pressure. The most common measurements made using body plethysmographs are thoracic gas volume (VTG) and airway resistance (RAW). This test is used mainly in the Pulmonary Function Testing laboratories.
Using body plethysmography, doctors can examine the lungs' resistance to airflow, distinguish between restrictive and obstructive lung diseases, determine the response to bronchodilators, and determine bronchial hyperreactivity in response to methacholine[2], histamine, or isocapnic hyperventilation.
Flow and Pressure Plethysmographs
There are two types of plethysmographs: flow and pressure. In flow plethysmography, airway resistance is measured by two maneuvers. The patient first pants while the mouth shutter is open to allow flow changes to be measured. Then, the mouth shutter closes at the patient's end expiratory or FRC level and the patient continues panting while maintaining an open glottis. This provides a measure of the driving pressure used to move air into the lungs.
Pressure plethysmographs are usually measured at the end-expiratory level and are then equal to FRC. The patient sits in the box, which has the pressure transducer in the wall of the device, and breathes through a mouthpiece connected to a device that contains an electronic shutter and a differential pressure pneumotachometer. The mouth pressure and box pressure changes that are measured during tidal breathing and panting maneuvers which are performed during the test by the patient at the end of expiration are sent to a microprocessor unit that calculates thoracic gas volume.
Preclinical research
Preclinical researchers studying pulmonary function measure respiratory parameters from conscious restrained and freely moving animals, as well as resistance/compliance from sedated animals using different models of body plethysmographs.
External links
See also
References
- American Thoracic Society ATS Mission Statement (Industry standard for Pulmonary Function Testing in USA) Retrieved February 5, 2008
- Guidelines for Methacholine and Exercise Challenge Testing Retrieved February 5, 2008
- American Thoracic Society/European Respiratory Society ATS/ERS Standardization of Lung Function Testing: (General Considerations for Lung Function Testing) Retrieved February 5, 2008
- Standardization of Spirometry Retrieved February 5, 2008
- AARC Clinical Practice Guideline: Body Plethysmography: 2001 Revision & Update (referencing Greg Ruppel’s text: Ruppel GL. Manual of pulmonary function testing, 7th ed. St Louis: Mosby-Yearbook; 1998).