10 Gigabit Ethernet: Difference between revisions
Tag: Reverted |
Tag: Reverted |
||
Line 66: | Line 66: | ||
! Media |
! Media |
||
! [[Optical fiber connector|OFC]] or [[RF connector|RFC]] |
! [[Optical fiber connector|OFC]] or [[RF connector|RFC]] |
||
! <small>Transceiver<br /> |
! <small>Transceiver<br />module</small> |
||
! Reach<br /> |
! Reach<br />(km) |
||
! <small>#<br /> |
! <small>#<br />media</small> |
||
! <small>Lanes<br />(⇅)</small> |
! <small>Lanes<br />(⇅)</small> |
||
! Notes |
! Notes |
||
Line 76: | Line 76: | ||
| [[10 Gigabit Ethernet#10GBASE-CX4|10GBASE<br />-C{{fontcolour|violet|X}}4]] |
| [[10 Gigabit Ethernet#10GBASE-CX4|10GBASE<br />-C{{fontcolour|violet|X}}4]] |
||
| {{nowrap|802.3ak-2004<br /><small>(CL48/54)</small>}} |
| {{nowrap|802.3ak-2004<br /><small>(CL48/54)</small>}} |
||
| {{partial| |
| {{partial|Legacy}} |
||
| {{terminated|[[Twinaxial cabling| |
| {{terminated|[[Twinaxial cabling|Twinaxial]]<br />[[Balanced line|balanced]]}} |
||
| {{terminated|<small>CX4 (SFF-8470)<br />{{no wrap|(IEC 61076-3-113)}}<br />([[InfiniBand|IB]])</small>}} |
| {{terminated|<small>CX4 (SFF-8470)<br />{{no wrap|(IEC 61076-3-113)}}<br />([[InfiniBand|IB]])</small>}} |
||
| align="center" | <small>''<del>[[XENPAK]]</del>'' <ref name="XENPAK_EOL">{{cite web |url=https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/eos-eol-notice-c51-734289.html |title=End-of-Sale and End-of-Life Announcement for the Cisco 10GBASE XENPAK Modules |publisher=Cisco |date=2015-04-01 |accessdate=2018-08-26}}</ref><br />[[X2 transceiver|X2]]<br />[[XFP transceiver|XFP]]</small> |
| align="center" | <small>''<del>[[XENPAK]]</del>'' <ref name="XENPAK_EOL">{{cite web |url=https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/eos-eol-notice-c51-734289.html |title=End-of-Sale and End-of-Life Announcement for the Cisco 10GBASE XENPAK Modules |publisher=Cisco |date=2015-04-01 |accessdate=2018-08-26}}</ref><br />[[X2 transceiver|X2]]<br />[[XFP transceiver|XFP]]</small> |
||
Line 87: | Line 87: | ||
| [[10 Gigabit Ethernet#10GBASE-KX4|10GBASE<br />-K{{fontcolour|violet|X}}4]] |
| [[10 Gigabit Ethernet#10GBASE-KX4|10GBASE<br />-K{{fontcolour|violet|X}}4]] |
||
| {{nowrap|802.3ap-2007<br /><small>(CL48/71)</small>}} |
| {{nowrap|802.3ap-2007<br /><small>(CL48/71)</small>}} |
||
| {{partial| |
| {{partial|Legacy}} |
||
| {{terminated|Cu- |
| {{terminated|Cu-backplane}} |
||
| {{N/A}} |
| {{N/A}} |
||
| {{N/A}} |
| {{N/A}} |
||
Line 154: | Line 154: | ||
| {{partial|{{nowrap|SFF-8431<br />(2006)}}}} |
| {{partial|{{nowrap|SFF-8431<br />(2006)}}}} |
||
| {{active|current}} |
| {{active|current}} |
||
| {{terminated| |
| {{terminated|Twinaxial<br />balanced}} |
||
| {{terminated|[[Small form-factor pluggable transceiver#10 Gbit/s SFP+|SFP+]]<br /><small>(SFF-8431)</small>}} |
| {{terminated|[[Small form-factor pluggable transceiver#10 Gbit/s SFP+|SFP+]]<br /><small>(SFF-8431)</small>}} |
||
| align="center" | <small>'''SFP+'''</small> |
| align="center" | <small>'''SFP+'''</small> |
||
Line 165: | Line 165: | ||
| {{nowrap|802.3ap-2007<br /><small>(CL49/72)</small>}} |
| {{nowrap|802.3ap-2007<br /><small>(CL49/72)</small>}} |
||
| {{active|current}} |
| {{active|current}} |
||
| {{terminated|Cu- |
| {{terminated|Cu-backplane}} |
||
| {{N/A}} |
| {{N/A}} |
||
| {{N/A}} |
| {{N/A}} |
Revision as of 06:36, 23 September 2020
10 Gigabit Ethernet (10GE, 10GbE, or 10 GigE) is a group of computer networking technologies for transmitting Ethernet frames at a rate of 10 gigabits per second. It was first defined by the IEEE 802.3ae-2002 standard. Unlike previous Ethernet standards, 10 Gigabit Ethernet defines only full-duplex point-to-point links which are generally connected by network switches; shared-medium CSMA/CD operation has not been carried over from the previous generations Ethernet standards[1] so half-duplex operation and repeater hubs do not exist in 10GbE.[2]
The 10 Gigabit Ethernet standard encompasses a number of different physical layer (PHY) standards. A networking device, such as a switch or a network interface controller may have different PHY types through pluggable PHY modules, such as those based on SFP+.[3] Like previous versions of Ethernet, 10GbE can use either copper or fiber cabling. Maximum distance over copper cable is 100 meters but because of its bandwidth requirements, higher-grade cables are required.[a]
The adoption of 10 Gigabit Ethernet has been more gradual than previous revisions of Ethernet: in 2007, one million 10GbE ports were shipped, in 2009 two million ports were shipped, and in 2010 over three million ports were shipped,[4][5] with an estimated nine million ports in 2011.[6] As of 2012[update], although the price per gigabit of bandwidth for 10 Gigabit Ethernet was about one-third compared to Gigabit Ethernet, the price per port of 10 Gigabit Ethernet still hindered more widespread adoption.[7][8]
Standards
Over the years the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group has published several standards relating to 10GbE.
Standard | Publication year | Description |
---|---|---|
802.3ae | 2002[9] | 10 Gbit/s Ethernet over fiber for LAN (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-LX4) and WAN (10GBASE-SW, 10GBASE-LW, 10GBASE-EW) |
802.3ak | 2004 | 10GBASE-CX4 10 Gbit/s Ethernet over twin-axial cable |
802.3-2005 | 2005 | A revision of base standard incorporating 802.3ae, 802.3ak and errata |
802.3an | 2006 | 10GBASE-T 10 Gbit/s Ethernet over copper twisted pair cable |
802.3ap | 2007 | Backplane Ethernet, 1 and 10 Gbit/s over printed circuit boards (10GBASE-KR and 10GBASE-KX4) |
802.3aq | 2006 | 10GBASE-LRM 10 Gbit/s Ethernet over multi-mode fiber with enhanced equalization |
802.3-2008 | 2008 | A revision of base standard incorporating the 802.3an/ap/aq/as amendments, two corrigenda and errata. Link aggregation moved to 802.1AX. |
802.3av | 2009 | 10GBASE-PR 10 Gbit/s Ethernet PHY for EPON |
802.3-2015 | 2015 | The previous version of the base standard |
802.3bz | 2016 | 2.5 Gigabit and 5 Gigabit Ethernet over Cat-5/Cat-6 twisted pair – 2.5GBASE-T and 5GBASE-T |
802.3-2018 | 2018 | The latest version of the base standard incorporating the 802.3bn/bp/bq/br/bs/bw/bu/bv/by/bz/cc/ce amendments. |
802.3ch | 2020 | Physical Layer Specifications and Management Parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s Automotive Electrical Ethernet (10GBASE-T1) |
Physical layer modules
This section and table needs additional citations for verification. (August 2015) |
To implement different 10GbE physical layer standards, many interfaces consist of a standard socket into which different physical (PHY) layer modules may be plugged. PHY modules are not specified in an official standards body but by multi-source agreements (MSAs) that can be negotiated more quickly. Relevant MSAs for 10GbE include XENPAK (and related X2 and XPAK), XFP and SFP+. When choosing a PHY module, a designer considers cost, reach, media type, power consumption, and size (form factor). A single point-to-point link can have different MSA pluggable formats on either end (e.g. XPAK and SFP+) as long as the 10GbE optical or copper port type (e.g. 10GBASE-SR) supported by the pluggable is identical.
XENPAK was the first MSA for 10GE and had the largest form factor. X2 and XPAK were later competing standards with smaller form factors. X2 and XPAK have not been as successful in the market as XENPAK. XFP came after X2 and XPAK and it is also smaller.
The newest module standard is the enhanced small form-factor pluggable transceiver, generally called SFP+. Based on the small form-factor pluggable transceiver (SFP) and developed by the ANSI T11 fibre channel group, it is smaller still and lower power than XFP. SFP+ has become the most popular socket on 10GE systems.[10][11] SFP+ modules do only optical to electrical conversion, no clock and data recovery, putting a higher burden on the host's channel equalization. SFP+ modules share a common physical form factor with legacy SFP modules, allowing higher port density than XFP and the re-use of existing designs for 24 or 48 ports in a 19-inch rack width blade.
Optical modules are connected to a host by either a XAUI, XFI or SerDes Framer Interface (SFI) interface. XENPAK, X2, and XPAK modules use XAUI to connect to their hosts. XAUI (XGXS) uses a four-lane data channel and is specified in IEEE 802.3 Clause 47. XFP modules use a XFI interface and SFP+ modules use an SFI interface. XFI and SFI use a single lane data channel and the 64b/66b encoding specified in IEEE 802.3 Clause 49.
SFP+ modules can further be grouped into two types of host interfaces: linear or limiting. Limiting modules are preferred except when for long-reach applications using 10GBASE-LRM modules.[12]
Fibre type | Introduced | Performance |
---|---|---|
MMF FDDI 62.5/125 µm | 1987 | 160 MHz·km @ 850 nm |
MMF OM1 62.5/125 µm | 1989 | 200 MHz·km @ 850 nm |
MMF OM2 50/125 µm | 1998 | 500 MHz·km @ 850 nm |
MMF OM3 50/125 µm | 2003 | 1500 MHz·km @ 850 nm |
MMF OM4 50/125 µm | 2008 | 3500 MHz·km @ 850 nm |
MMF OM5 50/125 µm | 2016 | 3500 MHz·km @ 850 nm + 1850 MHz·km @ 950 nm |
SMF OS1 9/125 µm | 1998 | 1.0 dB/km @ 1300/1550 nm |
SMF OS2 9/125 µm | 2000 | 0.4 dB/km @ 1300/1550 nm |
Name | Standard | Status | Media | OFC or RFC | Transceiver module |
Reach (km) |
# media |
Lanes (⇅) |
Notes |
---|---|---|---|---|---|---|---|---|---|
10 Gigabit Ethernet (10 GbE) – (Data rate: 10 Gbit/s – Line code: 64b/66b × NRZ – Line rate: 10.3125 GBd – Full-Duplex) [14][15][16] | |||||||||
10GBASE -CX4 |
802.3ak-2004 (CL48/54) |
Legacy | Twinaxial balanced |
CX4 (SFF-8470) (IEC 61076-3-113) (IB) |
X2 XFP |
0.015 | 4 | 4 | Data centres; Line code: 8b/10b × NRZ Line rate: 4x 3.125 GBd = 12.5 GBd |
10GBASE -KX4 |
802.3ap-2007 (CL48/71) |
Legacy | Cu-backplane | — | — | 0.001 | 4 | 4 | PCBs; Line code: 8b/10b × NRZ Line rate: 4x 3.125 GBd = 12.5 GBd |
10GBASE -LX4 |
802.3ae-2002 (CL48/53) |
legacy | Fibre 1269.0 – 1282.4 nm 1293.5 – 1306.9 nm 1318.0 – 1331.4 nm 1342.5 – 1355.9 nm |
SC | XENPAK X2 |
OM2: 0.3 | 1 | 4 | WDM;[18] Line code: 8b/10b × NRZ Line rate: 4x 3.125 GBd = 12.5 GBd Modal bandwidth: 500 MHz·km |
OS2: 10 | |||||||||
10GBASE -SW |
802.3ae-2002 (CL50/52) |
current | Fibre 850 nm |
SC LC |
SFP+ XPAK |
OM1: 0.033 | 2 | 1 | WAN; WAN-PHY; Line rate: 9.5846 GBd direct mapping as OC-192 / STM-64 SONET/SDH streams. -ZW: -EW with higher performance optics |
OM2: 0.082 | |||||||||
OM3: 0.3 | |||||||||
OM4: 0.4 | |||||||||
10GBASE -LW |
802.3ae-2002 (CL50/52) |
current | Fibre 1310 nm |
SC LC |
SFP+ XENPAK XPAK |
OS2: 10 | 2 | 1 | |
10GBASE -EW |
802.3ae-2002 (CL50/52) |
current | Fibre 1550 nm |
SC LC |
SFP+ | OS2: 40 | 2 | 1 | |
10GBASE -ZW |
proprietary (non IEEE) |
current | OS2: 80 | ||||||
10GBASE -CR Direct Attach |
SFF-8431 (2006) |
current | Twinaxial balanced |
SFP+ (SFF-8431) |
SFP+ | 0.007 0.015 0.1 |
1 | 1 | Data centres; Cable types: passive twinaxial (7 m), active (15 m), active optical (AOC): (100 m) |
10GBASE -KR |
802.3ap-2007 (CL49/72) |
current | Cu-backplane | — | — | 0.001 | 1 | 1 | PCBs |
10GBASE -SR |
802.3ae-2002 (CL49/52) |
current | Fibre 850 nm |
SC LC |
SFP+ XENPAK X2 XPAK XFP |
OM1: 0.033 | 2 | 1 | Modal bandwidth (reach): 160 MHz·km (26 m), 200 MHz·km (33 m), 400 MHz·km (66 m), 500 MHz·km (82 m), 2000 MHz·km (300 m), 4700 MHz·km (400 m) |
OM2: 0.082 | |||||||||
OM3: 0.3 | |||||||||
OM4: 0.4 | |||||||||
10GBASE -SRL |
proprietary (non IEEE) |
current | Fibre 850 nm |
SC LC |
SFP+ XENPAK X2 XFP |
OM1: 0.011 | 2 | 1 | Modal bandwidth (reach): 200 MHz·km (11 m), 400 MHz·km (22 m), 500 MHz·km (27 m), 2000 MHz·km (100 m), 4700 MHz·km (150 m) |
OM2: 0.027 | |||||||||
OM3: 0.1 | |||||||||
OM4: 0.15 | |||||||||
10GBASE -LR |
802.3ae-2002 (CL49/52) |
current | Fibre 1310 nm |
SC LC |
SFP+ XENPAK X2 XPAK XFP |
OS2: 10 | 2 | 1 | |
10GBASE -LRM |
802.3aq-2006 (CL49/68) |
current | Fibre 1300 nm |
SC LC |
SFP+ XENPAK X2 |
OM2: 0.22 | 2 | 1 | [18] Modal bandwidth: 500 MHz·km |
OM3: 0.22 | |||||||||
10GBASE -ER |
802.3ae-2002 (CL49/52) |
current | Fibre 1550 nm |
SC LC |
SFP+ XENPAK X2 XFP |
OS2: 40 | 2 | 1 | |
10GBASE -ZR |
proprietary (non IEEE) |
current | OS2: 80 | -ER with higher performance optics | |||||
10GBASE -PR |
802.3av-2009(75) | current | Fibre TX: 1270 nm RX: 1577 nm |
SC | SFP+ XFP |
OS2: 20 | 1 | 1 | 10G EPON |
Interconnect | Defined | Connector[19] | Medium | Media type | Max range | Notes |
---|---|---|---|---|---|---|
10GBASE-T | 2006 | 8P8C | Copper | Class E channel using category 6, Class Ea channel using 6a or 7 twisted pair | 55 m (Class E cat 6) 100 m (Class Ea cat 6a or 7) |
Can reuse existing cables, high port density, relatively high power |
Optical fiber
There are two basic types of optical fiber used for 10 Gigabit Ethernet: single-mode (SMF) and multi-mode (MMF).[20] In SMF light follows a single path through the fiber while in MMF it takes multiple paths resulting in differential mode delay (DMD). SMF is used for long-distance communication and MMF is used for distances of less than 300 m. SMF has a narrower core (8.3 μm) which requires a more precise termination and connection method. MMF has a wider core (50 or 62.5 μm). The advantage of MMF is that it can be driven by a low cost vertical-cavity surface-emitting laser (VCSEL) for short distances, and multi-mode connectors are cheaper and easier to terminate reliably in the field. The advantage of SMF is that it can work over longer distances.[21]
In the 802.3 standard, reference is made to FDDI-grade MMF fiber. This has a 62.5 μm core and a minimum modal bandwidth of 160 MHz·km at 850 nm. It was originally installed in the early 1990s for FDDI and 100BASE-FX networks. The 802.3 standard also references ISO/IEC 11801 which specifies optical MMF fiber types OM1, OM2, OM3 and OM4. OM1 has a 62.5 μm core while the others have a 50 μm core. At 850 nm the minimum modal bandwidth of OM1 is 200 MHz·km, of OM2 500 MHz·km, of OM3 2000 MHz·km and of OM4 4700 MHz·km. FDDI-grade cable is now obsolete and new structured cabling installations use either OM3 or OM4 cabling. OM3 cable can carry 10 Gigabit Ethernet 300 meters using low cost 10GBASE-SR optics.[22][23] OM4 can manage 400 meters.[24]
To distinguish SMF from MMF cables, SMF cables are usually yellow, while MMF cables are orange (OM1 & OM2) or aqua (OM3 & OM4). However, in fiber optics there is no uniform color for any specific optical speed or technology with the exception being angular physical connector (APC), it being an agreed color of green.[25]
There are also active optical cables (AOC). These have the optical electronics already connected eliminating the connectors between the cable and the optical module. They plug into standard SFP+ sockets. They are lower cost than other optical solutions because the manufacturer can match the electronics to the required length and type of cable.[citation needed]
10GBASE-SR
10GBASE-SR ("short range") is a port type for multi-mode fiber and uses 850 nm lasers.[26] Its Physical Coding Sublayer (PCS) is 64b/66b and is defined in IEEE 802.3 Clause 49 and its Physical Medium Dependent (PMD) sublayer in Clause 52. It delivers serialized data at a line rate of 10.3125 Gbd.[27]
The range depends on the type of multi-mode fiber used.[22][28]
Fibre type (micrometers) | Range (m) |
---|---|
FDDI-grade (62.5) | 25 |
OM1 (62.5) | 33 |
OM2 (50) | 82 |
OM3 | 300 |
OM4 | 400 |
MMF has the advantage over SMF of having lower cost connectors; its wider core requires less mechanical precision.
The 10GBASE-SR transmitter is implemented with a VCSEL which is low cost and low power. OM3 and OM4 optical cabling is sometimes described as laser optimized because they have been designed to work with VCSELs. 10GBASE-SR delivers the lowest cost, lowest power and smallest form factor optical modules.
There is a lower cost, lower power variant sometimes referred to as 10GBASE-SRL (10GBASE-SR lite). This is inter-operable with 10GBASE-SR but only has a reach of 100 meters.[29]
10GBASE-LR
10GBASE-LR (long reach) is a port type for single-mode fiber and uses 1310 nm lasers. Its 64b/66b PCS is defined in IEEE 802.3 Clause 49 and its PMD sublayer in Clause 52. It delivers serialized data at a line rate of 10.3125 GBd.[27]
The 10GBASE-LR transmitter is implemented with a Fabry–Pérot or distributed feedback laser (DFB). DFB lasers are more expensive than VCSELs but their high power and longer wavelength allow efficient coupling into the small core of single-mode fiber over greater distances.[citation needed]
10GBASE-LR maximum fiber length is 10 kilometers, although this will vary depending on the type of single-mode fiber used.
10GBASE-LRM
10GBASE-LRM, (long reach multi-mode) originally specified in IEEE 802.3aq is a port type for multi-mode fiber and uses 1310 nm lasers. Its 64b/66b PCS is defined in IEEE 802.3 Clause 49 and its PMD sublayer in Clause 68. It delivers serialized data at a line rate of 10.3125 GBd.[30] 10GBASE-LRM uses electronic dispersion compensation (EDC) for receive equalization.[31]
10GBASE-LRM allows distances up to 220 metres (720 ft) on FDDI-grade multi-mode fiber and the same 220m maximum reach on OM1, OM2 and OM3 fiber types.[22] 10GBASE-LRM reach is not quite as far as the older 10GBASE-LX4 standard. Some 10GBASE-LRM transceivers also allow distances up to 300 metres (980 ft) on standard single-mode fiber (SMF, G.652), however this is not part of the IEEE or MSA specification.[32] To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3 or OM4.[33]
10GBASE-ER
10GBASE-ER (extended reach) is a port type for single-mode fiber and uses 1550 nm lasers. Its 64b/66b PCS is defined in IEEE 802.3 Clause 49 and its PMD sublayer in Clause 52. It delivers serialized data at a line rate of 10.3125 GBd.[27]
The 10GBASE-ER transmitter is implemented with an externally modulated laser (EML).
10GBASE-ER has a reach of 40 kilometres (25 mi) over engineered links and 30 km over standard links.[22][34]
10GBASE-ZR
Several manufacturers have introduced 80 km (50 mi) range under the name 10GBASE-ZR. This 80 km PHY is not specified within the IEEE 802.3ae standard and manufacturers have created their own specifications based upon the 80 km PHY described in the OC-192/STM-64 SDH/SONET specifications.[35]
10GBASE-LX4
10GBASE-LX4 is a port type for multi-mode fiber and single-mode fiber. It uses four separate laser sources operating at 3.125 Gbit/s and Coarse wavelength-division multiplexing with four unique wavelengths around 1310 nm. Its 8B10B PCS is defined in IEEE 802.3 Clause 48 and its Physical Medium Dependent (PMD) sublayer in Clause 53.[22]
10GBASE-LX4 has a range of 10 kilometres (6.2 mi) over SMF. It can reach 300 metres (980 ft) over FDDI-grade, OM1, OM2 and OM3 multi-mode cabling.[b] In this case, it needs to be coupled through a SMF offset-launch mode-conditioning patch cord.[22]: subclauses 53.6 and 38.11.4
10GBASE-PR
10GBASE-PR originally specified in IEEE 802.3av is a 10G Ethernet PHY for passive optical networks and uses 1577 nm lasers in the downstream direction and 1270 nm lasers in the upstream direction. Its PMD sublayer is specified in Clause 75. Downstream delivers serialized data at a line rate of 10.3125 Gbit/s in a point to multi-point configuration.[22]
10GBASE-PR has three power budgets specified as 10GBASE-PR10, 10GBASE-PR20 and 10GBASE-PR30.[22]: 75.1.4
Bi-Directional Single Strand
Multiple vendors have introduced single strand, bi-directional 10 Gbit/s optics capable of a single-mode fiber connection functionally equivalent to 10GBASE-LR or -ER, but using a single strand of fiber optic cable. Analogous to 1000BASE-BX10, this is accomplished using a passive prism inside each optical transceiver and a matched pair of transceivers, using a pair of wavelengths such as 1270 and 1330 nm. Modules are available in varying transmit powers and reach distances ranging from 10 to 80 km.[36][37] Commonly called 10GBASE-BX, this variant should rather be called 10GBASE-BR since it also uses 64b/66b block encoding.
Copper
10G Ethernet can also run over twin-axial cabling, twisted pair cabling, and backplanes.
10GBASE-CX4
10GBASE-CX4 was the first 10G copper standard published by 802.3 (as 802.3ak-2004). It uses the XAUI 4-lane PCS (Clause 48) and copper cabling similar to that used by InfiniBand technology. It is specified to work up to a distance of 15 m (49 ft). Each lane carries 3.125 GBd of signaling bandwidth.
10GBASE-CX4 offers the advantages of low power, low cost and low latency, but has a bigger form factor and more bulky cables than the newer single lane SFP+ standard and a much shorter reach than fiber or 10GBASE-T. This cable is fairly rigid and considerably more costly than Category 5 or 6 UTP.
Shipments of 10GBASE-CX4 today are very low.[38] although some network vendors offer CX-4 interfaces which can be used for either 10GBASE ethernet or for stacking of switches at (slightly) lower latency. Some examples of combi stacking/ethernet are Dell PowerConnect PCT6200, PCT7000 and the 1G Powerconnect blade switches PCM6220 and PCM6348.[39]
SFP+ Direct Attach
Also known as Direct Attach (DA), Direct Attach Copper (DAC), 10GSFP+Cu, 10GBASE-CR,[40] 10GBASE-CX1, SFP+, or 10GbE Cu SFP cables. Short Direct Attach cables use a passive twin-ax cable assembly while longer ones, sometimes called active optical cable (AOC) use short wavelength optics.[41] Both types connect directly into an SFP+ housing. SFP+ Direct Attach has a fixed-length cable, typically 1 to 7 m (passive cables), up to 15 m (active cables),[42] or up to 100 m in length (active optical cables).[41] Like 10GBASE-CX4, DA is low-power, low-cost and low-latency with the added advantages of using less bulky cables and of having the small form factor of SFP+. SFP+ Direct Attach today is tremendously popular, with more ports installed than 10GBASE-SR.[38]
Backplane
Backplane Ethernet, also known by its task force name 802.3ap, is used in backplane applications such as blade servers and modular routers/switches with upgradable line cards. 802.3ap implementations are required to operate in an environment comprising up to 1 metre (39 in) of copper printed circuit board with two connectors. The standard defines two port types for 10 Gbit/s (10GBASE-KX4 and 10GBASE-KR) and a 1 Gbit/s port type (1000BASE-KX). It also defines an optional layer for FEC, a backplane autonegotiation protocol and link training for 10GBASE-KR where the receiver can set a three tap transmit equalizer. The autonegotiation protocol selects between 1000BASE-KX, 10GBASE-KX4, 10GBASE-KR or 40GBASE-KR4 operation. 40GBASE-KR4 is defined in 802.3ba.[43]
New backplane designs use 10GBASE-KR rather than 10GBASE-KX4.[38]
10GBASE-KX4
This operates over four backplane lanes and uses the same physical layer coding (defined in IEEE 802.3 Clause 48) as 10GBASE-CX4.
10GBASE-KR
This operates over a single backplane lane and uses the same physical layer coding (defined in IEEE 802.3 Clause 49) as 10GBASE-LR/ER/SR.
10GBASE-T
10GBASE-T, or IEEE 802.3an-2006, is a standard released in 2006 to provide 10 Gbit/s connections over unshielded or shielded twisted pair cables, over distances up to 100 metres (330 ft).[44] Category 6a is required to reach the full distance of 100 metres (330 ft) and category 6 may reach a distance of 55 metres (180 ft) depending on the quality of installation, determined only after re-testing to 500 MHz. 10GBASE-T cable infrastructure can also be used for 1000BASE-T allowing a gradual upgrade from 1000BASE-T using autonegotiation to select which speed to use. Due to additional line coding overhead, 10GBASE-T has a slightly higher latency in comparison to most other 10GBASE variants, in the range 2 to 4 microseconds compared to 1 to 12 microseconds on 1000BASE-T [clarification needed] (depending on packet size[c]).[45][46] As of 2010, 10GBASE-T silicon is available from several manufacturers [47][48][49][50] with claimed power dissipation of 3–4 W at structure sizes of 40 nm, and with 28 nm in development, power will continue to decline.[51]
10GBASE-T uses the IEC 60603-7 8P8C modular connectors already widely used with Ethernet. Transmission characteristics are now specified to 500 MHz. To reach this frequency Category 6A or better balanced twisted pair cables specified in ISO/IEC 11801 amendment 2 or ANSI/TIA-568-C.2 are needed to carry 10GBASE-T up to distances of 100 m. Category 6 cables can carry 10GBASE-T for shorter distances when qualified according to the guidelines in ISO TR 24750 or TIA-155-A.
The 802.3an standard specifies the wire-level modulation for 10GBASE-T to use Tomlinson-Harashima precoding (THP) and pulse-amplitude modulation with 16 discrete levels (PAM-16), encoded in a two-dimensional checkerboard pattern known as DSQ128 sent on the line at 800 Msymbols/sec.[52][53] Prior to precoding, forward error correction (FEC) coding is performed using a [2048,1723]2 low-density parity-check code on 1723 bits, with the parity check matrix construction based on a generalized Reed–Solomon [32,2,31] code over GF(26).[53] Another 1536 bits are uncoded. Within each 1723+1536 block, there are 1+50+8+1 signaling and error detection bits and 3200 data bits (and occupying 320 ns on the line). By contrast PAM-5 is the modulation technique used in 1000BASE-T Gigabit Ethernet.
The line encoding used by 10GBASE-T is the basis for the newer and slower 2.5GBASE-T and 5GBASE-T standard, implementing a 2.5 or 5.0 Gbit/s connection over existing category 5e or 6 cabling.[54] Cables which will not function reliably with 10GBASE-T may successfully operate with 2.5GBASE-T or 5GBASE-T if supported by both ends.[55]
10GBASE-T1
10GBASE-T1 is for automotive applications and operates over a single balanced pair of conductors.
WAN PHY (10GBASE-W)
At the time that the 10 Gigabit Ethernet standard was developed, interest in 10GbE as a wide area network (WAN) transport led to the introduction of a WAN PHY for 10GbE. The WAN PHY encapsulates Ethernet packets in SONET OC-192c frames and operates at a slightly slower data-rate (9.95328 Gbit/s) than the local area network (LAN) PHY.
The WAN PHY uses the same 10GBASE-S, 10GBASE-L and 10GBASE-E optical PMDs as the LAN PHYs and is designated as 10GBASE-SW, 10GBASE-LW or 10GBASE-EW. Its 64b/66b PCS is defined in IEEE 802.3 Clause 49 and its PMD sublayers in Clauses 52. It also uses a WAN Interface Sublayer (WIS) defined in Clause 50 which adds extra encapsulation to format the frame data to be compatible with SONET STS-192c.[22]
The WAN PHY was designed to interoperate with OC-192/STM-64 SDH/SONET equipment using a light-weight SDH/SONET frame running at 9.953 Gbit/s.
The WAN PHY can drive maximum link distances up to 80 km depending on the fiber standard employed.
Notes
- ^ Category 6 cable supports runs up to 55 meters. Category 6A or higher is good for lengths up to 100 meters.
- ^ All these fiber types are specified to have a minimum modal bandwidth of 500 MHz × km at 1300 nm.
- ^ A maximum Gigabit Ethernet packet requires 12.2 μs for transfer (1526 × 8 ÷ 109) for store-and-forward, this adds to hardware latency.
See also
References
- ^ Michael Palmer. Hands-On Networking Fundamentals, 2nd ed. Cengage Learning. p. 180. ISBN 978-1-285-40275-8.
- ^ IEEE 802.3-2012 44.1.1 Scope
- ^ Sharma, Anil (19 January 2011). "LightCounting forecasts CAGR of Over 300 Percent for 10GBASE-T Port Shipments Through 2014". TMCnet. Retrieved 7 May 2011.
- ^ "Dell'Oro press release". Archived from the original on 19 July 2011. Retrieved 29 March 2011.
- ^ "Intel blog about Interop 2011". Retrieved 20 September 2011.
- ^ https://www.wired.com/wiredenterprise/2012/03/google-microsoft-network-gear/
- ^ 10 Gigabit Ethernet still too expensive on servers
- ^ Soz, switch-fondlers: Doesn't look like 2013 is 10Gb Ethernet's year
- ^ "IEEE P802.3ae 10Gb/s Ethernet Task Force". Retrieved 19 March 2013.
- ^ "LightCounting's LightTrends April 2010". Retrieved 3 May 2010.[permanent dead link]
- ^ "10GbE Optical Component and SFP+ Modules: This Time It's Different by Andrew Schmitt". Retrieved 11 March 2008.
- ^ Ryan Latchman; Bharat Tailor. "The road to SFP+: Examining module and system architectures". Archived from the original on 16 May 2008.
- ^ Charles E. Spurgeon (2014). Ethernet: The Definitive Guide (2nd ed.). O'Reilly Media. ISBN 978-1-4493-6184-6.
- ^ "Cisco 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix". Cisco. 19 August 2018. Retrieved 26 August 2018.
- ^ "Confused by 10GbE optics modules?". Network World. 12 June 2010. Retrieved 26 August 2018.
- ^ "Common 10G Fiber Transceiver: 10G XENPAK, 10G X2, 10G XFP, 10G SFP+". Blog of Fiber Transceivers. 18 June 2013. Retrieved 26 August 2018.
- ^ "End-of-Sale and End-of-Life Announcement for the Cisco 10GBASE XENPAK Modules". Cisco. 1 April 2015. Retrieved 26 August 2018.
- ^ a b "Network Topologies and Distances" (PDF). MC Communications. 14 November 2007. Retrieved 25 August 2018.
- ^ 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix
- ^ "Optical Fiber and 10 gigabit Ethernet white paper by the 10GEA". Archived from the original on 14 June 2008.
- ^ "Why choose Multimode fiber? by Corning" (PDF). Archived from the original (PDF) on 30 July 2014.
- ^ a b c d e f g h i "IEEE 802.3 standard".
- ^ "10 Gigabit Ethernet over Multimode Fiber by John George" (PDF). Archived from the original (PDF) on 10 September 2008. Retrieved 10 March 2008.
- ^ IEEE 802.3 52.5 PMD to MDI optical specifications for 10GBASE-S
- ^ "How to tell? MMF or SMF". Retrieved 6 September 2011.[unreliable source?]
- ^ Held, Gilbert (19 April 2016). Windows Networking Tools: The Complete Guide to Management, Troubleshooting, and Security. CRC Press. ISBN 9781466511071.
- ^ a b c IEEE 802.3 52.1.1.1.2 PMD_UNITDATA.request: When generated
- ^ "Description of Cisco 10G optical modules". Retrieved 3 May 2010.
- ^ Optics Modules and Cables (PDF), retrieved 28 June 2019
- ^ IEEE 802.3 Table 68–3—10GBASE-LRM transmit characteristics
- ^ "10GBase-LX4 vs 10GBase-LRM: A debate". Archived from the original on 21 July 2009. Retrieved 16 July 2009.
- ^ IEEE 802.3 68.5 PMD to MDI optical specifications
- ^ "Cisco 10GBASE SFP+ Modules Data Sheet". Cisco Systems. February 2012. Retrieved 12 May 2012.
- ^ "Cisco 10GBASE XENPAK Modules". Cisco Systems. November 2011. Retrieved 12 May 2012.
- ^ "Cisco 10GbE optics and 10GBase-ZR".
- ^ "Cisco 10GbE single strand optics" (PDF).
- ^ "Finisar 10GbE single strand optics".
- ^ a b c "Another Serving of Alphabet Soup — by Intel". Retrieved 4 September 2011.
- ^ Dove, Dan."10GBase-CX4 lowers 10G Ethernet cost." Network World. Network World, Inc. 24 May 2004. Web. 19 Dec. 2014.
- ^ "Cables and Transceivers". Arista Networks. Retrieved 21 September 2012.
- ^ a b "SFP+ AOC Cable active". fiber24.de. Retrieved 30 January 2017.
- ^ "HP X242 SFP+ Direct Attach Copper Cable". Hewlett Packard. Archived from the original on 14 October 2012. Retrieved 27 March 2013.
- ^ "IEEE P802.3ap Backplane Ethernet Task Force". Retrieved 30 January 2011.
- ^ "IEEE Standards Status Report for 802.3an". Archived from the original on 5 September 2007. Retrieved 14 August 2007.
- ^ 10GBASE-T for Broad 10 Gigabit Adoption in the Data Center (PDF), Intel, retrieved 21 December 2011
- ^ SWITCHES SWITCH FROM 1000BASE‐T TO 10GBASE‐T NOW (PDF), Teranetics, October 2009, retrieved 21 December 2011
- ^ "Broadcom 10GBASE-T PHY". Archived from the original on 16 April 2015. Retrieved 2 December 2011.
- ^ "PLX Technology, Teranetics 10GBASE-T PHY". Retrieved 11 February 2011.
- ^ "Solar Flare 10GBASE-T PHY". Archived from the original on 7 September 2009. Retrieved 5 September 2009.
- ^ "Aquantia 10GBASE-T PHY" (PDF). Archived from the original (PDF) on 3 December 2008. Retrieved 10 December 2008.
- ^ Hostetler, Jeff. "10GBASE-T – Is 2012 the Year for Wide Adoption?". Archived from the original on 23 March 2012. Retrieved 28 November 2018.
- ^ IEEE 802.3-2012 55.1.3 Operation of 10GBASE-T
- ^ a b Ungerboeck, Gottfried (22 September 2006). "10GBASE-T: 10Gbit/s Ethernet over copper" (PDF). Vienna: Broadcom. Retrieved 7 August 2013.
- ^ "IEEE 802.3 NGEABT Objectives approved by IEEE 802.3, March 12, 2015" (PDF).
- ^ "NBaseT".
External links
- Full text of the IEEE 802.3 standard
- IEEE 802.3 Ethernet Working Group
- Ethernet Alliance website
- University of New Hampshire Interoperability Laboratory 10 Gigabit Ethernet Consortium
- World's First Independent 10GBASE-T Comparative Test Study
- Description of SFP+ Direct Attach server NIC in top-of-rack concept