Switching Control Center System: Difference between revisions
m Stebba link |
Lvcipriani (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
The '''Switching Control Center System''' was an [[Operations Support System]] developed by [[Bell Laboratories]] and deployed during the early 1970s. This [[computer]] system was based on the [[PDP-11]] product line from [[Digital Equipment Corporation]] and used the [[Unix]] [[operating system]] and custom [[application software]] that was developed and maintained by [[Bell Labs]] in [[ |
The '''Switching Control Center System''' was an [[Operations Support System]] developed by [[Bell Laboratories]] and deployed during the early 1970s. This [[computer]] system was first based on the [[PDP-11]] product line from [[Digital Equipment Corporation]] and used the [[CB Unix]] [[operating system]] and custom [[application software]] and [[device drivers]] that was developed and maintained by [[Bell Labs]] in [[Columbus, Ohio]] USA. SCCS was ported to the [[AT%26T_Computer_Systems|AT&T 3B20 and 3B5]] computers running [[UNIX_System_V ]] Release 2 in the early 1980s. |
||
Prior to the SCCS, many [[telephone company]] switching centers were staffed 24 hours a day 365 days a year. Deployment of the SCCS allowed telephone companies to significantly reduce the number of technicians by implementing a local switching control center office and dispatch technicians as required to resolve problems or perform routine maintenance operations. |
Prior to the SCCS, many [[telephone company]] switching centers were staffed 24 hours a day 365 days a year. Deployment of the SCCS allowed telephone companies to significantly reduce the number of technicians by implementing a local switching control center office and dispatch technicians as required to resolve problems or perform routine maintenance operations. |
||
Line 5: | Line 5: | ||
During the early 1970s, telephone companies also phased out the older electromechanical switching systems such as the [[1XB switch|Number 1 Crossbar]], [[5XB switch|Number 5 Crossbar]], and [[Strowger switch|Step-By-Step]] circuit switching systems and replace them with newer [[electronic switching system]]s that were controlled by proprietary computers but still used analog switch fabrics such as Bell-proprietary [http://www.ieee.org/portal/cms_docs_iportals/iportals/aboutus/history_center/oral_history/pdfs/Andrews380.pdf fereed switch devices]. |
During the early 1970s, telephone companies also phased out the older electromechanical switching systems such as the [[1XB switch|Number 1 Crossbar]], [[5XB switch|Number 5 Crossbar]], and [[Strowger switch|Step-By-Step]] circuit switching systems and replace them with newer [[electronic switching system]]s that were controlled by proprietary computers but still used analog switch fabrics such as Bell-proprietary [http://www.ieee.org/portal/cms_docs_iportals/iportals/aboutus/history_center/oral_history/pdfs/Andrews380.pdf fereed switch devices]. |
||
The SCCS system was phased out during the late 1980s and replaced by an [[Operations Support Systems|OSS]] known as [http://www.telcordia.com/products/nma/index.html Network Monitoring and Analysis] or [[Network Monitoring and Analysis|NMA]] that was developed by [[Bell Communications Research]] now [http://www.telcordia.com Telcordia Technologies]. |
The SCCS system was phased out during the late 1980s and replaced by an [[Operations Support Systems|OSS]] known as [http://www.telcordia.com/products/nma/index.html Network Monitoring and Analysis] or [[Network Monitoring and Analysis|NMA]] that was developed by [[Bell Communications Research]] now [http://www.telcordia.com Telcordia Technologies]. AT&T developed products based on SCCS, such as Compulert, which were not covered by the 1984 consent degree. |
||
The primary purpose of the SCCS system was to provide [[Business operations|operations]], [[System administrator|administration]], [[Maintenance, repair and operations|maintenance]], and [[provisioning]] ([[OAMP]]) functions for [[telephone company]] network operations staff. The SCCS accepted as input the slow 110 [[baud]] [[teletype]] messages from [[Telecommunication circuit|circuit]] [[switching systems]] such as the [[1ESS switch|Number 1 ESS]], Number 2 ESS, Number 3 ESS, [[5ESS switch|Number 5 ESS]], and [[Traffic Service Position System]] ([[TSPS]]) network switches and provide analysis, reports, troubleshooting support, and other functions using newer faster DataSpeed-40 terminals. |
The primary purpose of the SCCS system was to provide [[Business operations|operations]], [[System administrator|administration]], [[Maintenance, repair and operations|maintenance]], and [[provisioning]] ([[OAMP]]) functions for [[telephone company]] network operations staff. The SCCS accepted as input the slow 110 [[baud]] [[teletype]] messages from [[Telecommunication circuit|circuit]] [[switching systems]] such as the [[1ESS switch|Number 1 ESS]], Number 2 ESS, Number 3 ESS, [[5ESS switch|Number 5 ESS]], and [[Traffic Service Position System]] ([[TSPS]]) network switches and provide analysis, reports, troubleshooting support, and other functions using newer faster DataSpeed-40 terminals. |
Revision as of 20:00, 20 January 2008
The Switching Control Center System was an Operations Support System developed by Bell Laboratories and deployed during the early 1970s. This computer system was first based on the PDP-11 product line from Digital Equipment Corporation and used the CB Unix operating system and custom application software and device drivers that was developed and maintained by Bell Labs in Columbus, Ohio USA. SCCS was ported to the AT&T 3B20 and 3B5 computers running UNIX_System_V Release 2 in the early 1980s.
Prior to the SCCS, many telephone company switching centers were staffed 24 hours a day 365 days a year. Deployment of the SCCS allowed telephone companies to significantly reduce the number of technicians by implementing a local switching control center office and dispatch technicians as required to resolve problems or perform routine maintenance operations.
During the early 1970s, telephone companies also phased out the older electromechanical switching systems such as the Number 1 Crossbar, Number 5 Crossbar, and Step-By-Step circuit switching systems and replace them with newer electronic switching systems that were controlled by proprietary computers but still used analog switch fabrics such as Bell-proprietary fereed switch devices.
The SCCS system was phased out during the late 1980s and replaced by an OSS known as Network Monitoring and Analysis or NMA that was developed by Bell Communications Research now Telcordia Technologies. AT&T developed products based on SCCS, such as Compulert, which were not covered by the 1984 consent degree.
The primary purpose of the SCCS system was to provide operations, administration, maintenance, and provisioning (OAMP) functions for telephone company network operations staff. The SCCS accepted as input the slow 110 baud teletype messages from circuit switching systems such as the Number 1 ESS, Number 2 ESS, Number 3 ESS, Number 5 ESS, and Traffic Service Position System (TSPS) network switches and provide analysis, reports, troubleshooting support, and other functions using newer faster DataSpeed-40 terminals.
This system was documented in the Bell System Technical Journal and AT&T internal Bell System Practices during the 1970s.